User's Manual

24XStream™ Wireless OEM Module Manual v2.8
5
APPROVED ANTENNA LIST & ANTENNA SPEARATION DISTANCES
FOR COMPLAINCE WITH FCC EXPSOSURE REQUIREMENTSS
Manufacturer Part Number Type Gain
(dBi)
Applic
ation*
Antenna
Separation
Distance for
FCC RX
Exposure
Compliance
MaxStream A24-Y6 Yagi 6 F 2 meters
MaxStream A24-Y8 Yagi 8.8 F 2 meters
MaxStream A24-Y9 Yagi 9 F 2 meters
MaxStream A24-Y10 Yagi 10 F 2 meters
MaxStream A24-Y11 Yagi 11 F 2 meters
MaxStream A24-Y12 Yagi 12 F 2 meters
MaxStream A24-Y12 Yagi 12.5 F 2 meters
MaxStream A24-Y13 Yagi 13.5 F 2 meters
MaxStream A24-Y15 Yagi 15 F 2 meters
MaxStream A24-F2 Omni Directional 2.1 M/F 20 centimeters
MaxStream A24-F3 Omni Directional 3 M/F 20 centimeters
MaxStream A24-F5 Omni Directional 5 M/F 20 centimeters
MaxStream A24-F7 Omni Directional 7.2 F 2 meters
MaxStream A24-F8 Omni Directional 8 F 2 meters
MaxStream A24-F9 Omni Directional 9.5 F 2 meters
MaxStream A24-F10 Omni Directional 10 F 2 meters
MaxStream A24-F12 Omni Directional 12 F 2 meters
MaxStream A24-F15 Omni Directional 15 F 2 meters
MaxStream A24-P8 Panel 8.5 F 2 meters
MaxStream A24-P13 Panel 13 F 2 meters
MaxStream A24-P14 Panel 14 F 2 meters
MaxStream A24-P15 Panel 15 F 2 meters
MaxStream A24-P16 Panel 16 F 2 meters
MaxStream A24-P19 Panel 19 F 2 meters
MaxStream A24-HABMM-P6I Dipole 2.1 M/F 20 centimeters
MaxStream A24-HBMM-P6I Dipole 2.1 M/F 20 centimeters
MaxStream A24-HABSM Dipole 2.1 M/F 20 centimeters
MaxStream A24-QABMM-P6I Monopole 1.9 M/F 20 centimeters
MaxStream A24-QBMM-P6I Monopole 1.9 M/F 20 centimeters
MaxStream A24-QI Monopole 1.9 M/F 20 centimeters
*M=Mobile, F=Fixed/Base-Station
RF EXPOSURE
WARNING: This equipment is approved only for mobile and base station transmitting
devices, separation distances of (i) 20 centimeters or more for antennas with gains < 6
dBi or (ii) 2 meters or more for antennas with gains > 6 dBi should be maintained
between the antenna of this device and persons during operation. To ensure
compliance, operation at distances closer than this is not recommended.
The preceding statement must be included as a CAUTION statement in
manuals for OEM products to alert users on FCC RF Exposure compliance.