User's Manual

MaxStream 9XStream™ Wireless OEM Module Manual v2.8
33
Confidential and Proprietary, ©MaxStream, Inc. 2001
Experiment 2 – Data Transmission
Figure B2 – Plot of transmitted and received data after
setting the SY parameter to 20.
In Figure B1, where synchronization information was
transmitted with the data, 54.0 ms was required to transmit
each packet to the receiver. After adjusting the SY parameter to
stop sending synchronization information in the preamble,
Figure B2 shows that the same data transmission occurred in
only 26.8 ms.