User's Manual

9XTend™ OEM RF Module - Product Manual v2.x6x

* Firmware version in which command and parameter options were rst supported

PK 0x29 (41d) Maximum RF Packet Size 1 - 0x800 [Bytes] RF Interfacing 2 varies

)ttaW 1( 41gnicafretnI FR4 - 0leveL rewoP XT)d85( A3x0LP

01)rewoP woL( peelS1 - 0pu-ekaW niP)d92( D1

x0WP

RB 0x20 (32d) Packetization Threshold 1 - Current value of PK Serial Interfacing 2 0x800 (2048d)

RC -- Ambient Power - Single Channel 0 - 0x31 [dBm, read-only] Diagnostics 1 --

----)laicepS(--stluafeD erotseR)d41( E0x0ER

RM -- Ambient Power - All Channels No parameter - 0x7D0 Diagnostics

2--

01ytiruceS & gnikrowteN]stols[ FFx0 - 0stolS yale

D)d52( 91x0NR

RO 0x21 (33d) Packetization Timeout 0 - 0xFFFF [x UART character time] Serial Interfacing 2 3

RP 0x22 (34d) RSSI PWM Timer 0 - 0xFF [x 100 msec] Diagnostics 1 0x20 (32d)

)d01( A0x01ytiruceS & gnikrowteNFFx0 - 0seirteR)d42( 81x0 RR

01gnicafretnI laireS2 - 0

noitarugifnoC 1IPG)d22( 61x0TR

01gnicafretnI laireS1 - 0stiB potS)d55( 73x0BS

SH 0x25 (37d) Serial Number High 0 - 0xFFFF [read-only] Diagnostics 2 varies

SL 0x26 (38d) Serial Number

Low 0 - 0xFFFF [read-only] Diagnostics 2 varies

SM 0x01 (1d) Sleep Mode 0 - 8 (3 is reserved) Sleep (Low Power) 1 0

ST 0x02 (2d) Time before Sleep (ATAT+3) - 0x7FFF [x 100 msec] Sleep (Low Power) 2 0x64 (100d)

TP 0x38 (56d) Board Temperature 0 - 0x7F [read-only] Diagnostics 1 --

TR 0x1B (27d) Delivery Failure Count 0 - 0xFFFF [read-only] Diagnostics 2 0

TT 0x1A (26d) Streaming Limit 0 - 0xFFFF [0 = disabled] Networking & Security 2 0

01gnicafretnI FR1

- 0ylnO timsnarT)d36( F3x0XT

----scitsongaiDgnirts snruteResobrev - noisreV erawmriF--LV

VR 0x14 (20d) Firmware Version 0 - 0xFFFF

[read-only] Diagnostics 2 --

----scitson

gaiDgnirts snruteRsrebmuN gninraW evitcA--AW

----scitsongaiDgnirts snruteRataD gninraW--NW

----)laicepS

(--etirW)d8( 80x0RW

----scitsongaiDgnirts snruteRsrebmuN gninraW ykcitS--SW

Table 3-01. XTend Commands (The RF modules expect numerical values in hexadecimal. Hexadecimal values are designated by a “0x”

prex. Decimal equivalents are designated

by a “d” sux.)

AT 

Command

Binary 

Command

AT Command Name Parameter Range

Command 