FHX-8100 Eight-Port Fast Ethernet Hub User’s Guide Part #MAN072 Rev. 1.
Contents Section 1 Section 2 Section 3 Section 4 Section 5 Section 6 Section 7 Appendix A Appendix B Appendix C Introduction .................................................................... 1 Installation ..................................................................... 1 LED indicators ............................................................... 2 Troubleshooting ............................................................. 2 Specifications ......................................................
Section 1 - Introduction The MaxTech FHX-8100 is an 8-port hub compliant with the IEEE 802.3u 100Base-TX fast ethernet standard. The eight RJ-45 ports connect workstations or other devices together on a 100Base-TX fast ethernet network using twistedpair cable. An additional crossover port connects this hub to a second hub using a standard (straight-through) network cable for easy network expansion. A full set of LED indicators assist in network troubleshooting.
Section 3 - LED indicators The front-panel LEDs (see Figure 2) show the status of the hub and the network connections.
Section 5 - Specifications Network Standard: Transfer rate: Topology: Access Method: Media: Max. cable length: Ports: Crossover connector: Auto-partition: Dimensions: Certification: Temperature: Humidity: Power: IEEE 802.3u Ethernet 100Base-TX Class II Repeater 100 Mbps Tree/Star CSMA/CD, 100 Mbps Catagory 5, 2 pair, UTP or STP 328 ft. (100 meters) 8 RJ-45 jacks 1 (port 8) Yes 10.75” x 6.54” x 1.69” FCC Part 15 Class A 0° C to 40° C (operating) 5% to 95% (operating, non-condensing) 100-240VAC, 0.4 Amp max.
Section 7 - Technical Support In the unlikely event you experience difficulty in the use of the product, or if it does not operate as described, we suggest you: (1) consult the Troubleshooting section of this guide and (2) consult with your dealer. If you still cannot resolve the problem, call the MaxTech Service Center at (201) 586-8686 between 8:00 a.m. and 8:00 p.m. (EST Monday through Friday).
2. 4. 5. it in a sturdy corrugated box. Be sure to include your name, address, day-time telephone number, RMA number, and a brief description of the problem (also enclose a check for outof-warranty repair). Enclose your check or Postal Money Order for $7.50 to cover the cost of return shipping/handling. Please do not send cash or stamps. After wrapping the package securely for shipping, print your name, return address and the RMA # clearly on the outside of your package.
