Speakerphone Modem User's Manual

2.4.1.2 Windows 98

When Windows 98 starts for the first time after card

installation, it detects the adapter and displays the Add

New Hardware Wizard.

Insert the disk that contains your modem drivers into

the appropriate drive and click “Next. Windows 98 will ask

you "What do you want Windows to do" Select "Search

for the best driver for your device". Click "Next". Windows

98 will find the driver on the driver disk. Click "Next".

Windows will now find a second device on the modem.

Make sure that the driver disk is still in the disk drive and

click “Next.” Windows will find the second driver. Click

“Finish” to complete the installation.

When all necessary files are copied, the modem is

configured. Windows 98 will assign the modem a COM

port and IRQ line. Proceed to Section 2.5.

2.5 Software Installation and Configuration

You are now ready to install and configure the

communication software. Refer to your software manual

for installation procedures.

We suggest the following communication param-

eters when you first use your data communication

2.4.1.1 Windows 95 Release 4.00.950 B

When Windows 95 starts for the first time after card

installation, it detects the modem and displays the Update

Device Driver Wizard. Insert the driver disk into the disk

drive and click “Next.” Windows will find the driver on the

driver disk. Click “Finish. Windows 95 may request its own

installation disks or CD for some files. Insert the Windows

95 disks or CD as required.

Windows will now find a second device on the

modem. Make sure that the driver disk is still in the disk

drive and click “Next.” Windows will find the second

driver. Click “Finish” to complete the installation.

When all necessary files are copied, the modem is

configured. Windows 95 will assign the modem a COM

port and IRQ line. Proceed to Section 2.5.