High Performance 10 Base-T 5-port Ethernet Hub HX-5 User’s Guide Part #MAN118 Rev. 1.
HX-5 User’s Guide Section 1 - Introduction The MaxTech HX-5 is a 5-port ethernet hub compliant with the IEEE 802.3 10Base-T standard. The five RJ-45 ports connect workstations or other devices together on a 10Base-T network using unshielded twisted-pair cable. An additional crossover port connects this hub to a second hub using standard UTP cable for easy network expansion. A full set of LED indicators assist in network troubleshooting.
the cable into an open port (1 through 5 except the crossover port) on the hub (See Figure 1). The length of the cable must be less than 328 feet (100 meters). A proper network connection between the hub and an active workstation is indicated by a steady green LINK LED for that port. 2.1 Connecting Hub to Hub The network can be expanded Figure 2 - Connecting Hubs beyond five workstations by daisy-chaining two or more hubs together.
Appendix A - Specifications Network Standard: Transfer rate: Topology: Max. cable length: Ports: Crossover connector: Auto-partition: Polarity correction: Dimensions: Weight: EMI/RFI: Temperature: Humidity: Power: IEEE 802.3 Ethernet 10Base-T 10 Mbps Star 328 ft. (100 meters) 5 RJ-45 jacks 1 (port 5) Yes Yes 5.1” x 3.4” x 1.1” 6 oz.
paired by an unauthorized center. In the event the product requires service, follow the procedure outlined in Technical Support. When you are instructed by the Technical Support Representative to return the product to MaxTech for repair, you will be given an RMA (Return Merchandise Authorization) number. You must have an RMA Number to return the product for service. Use the following procedure to return the product to MaxTech: 1. 2. 4. 5.
