Modem User's Manual

Section One - Introduction

The 14.4 Kbps Series FAX/Voice/Data Modem con-

nect your computer to all popular high speed modems

available today. This manual describes the hardware instal-

lation procedures for your new modem product. Additional

information on AT commands and S-registers are provided

so that your system can be customized for a particular

operating environment.

Section Two - Installation

This section will provide step by step instructions on

how to install your new 14.4 Kbps FAX/Voice/Data modem.

Installation of this modem product is a two-step process

consisting of actual hardware installation and communica-

tion software installation and configuration.

2.1 Unpacking Your Modem

Before you begin your installation, be certain that you

have all the items listed below. This package contains:

• A modem • A telephone cable

• User's manual • Software for the modem

• Software user's manual

2.2 Hardware Installation

Installation of this modem requires opening and ma-

nipulating your PC. Exercise caution at all times when

working with AC powered and static-sensitive equipment.

Turn off and unplug your PC before installation. Discharge

any static electricity from your body by touching any metal

surface.

1. Turn off and unplug your computer from the AC outlet.

2. Determine how many serial ports are built into your com-

puter (examine the back of your computer). Refer to Figure

2-1 to identify common serial ports.

male connector

Figure 2-1 Common Serial Ports