Modem User's Manual

Temperature: 0 to 55 degrees C (Operating); -20 to 80

degrees C (Non-operating)

Section Eight - Support and Service

In the unlikely event you experience difficulty in the use of this

product, we suggest you: (1) consult the Troubleshooting section

of this guide and (2) consult with your dealer. To obtain service for

this product, follow the Return Merchandise Authorization Proce-

dure as outlined in the Warranty card.

Section Nine - FCC , DOC & Other Notices

9.1 FCC Compliance

This equipment complies with Part 68 of the FCC Rules. On this

equipment is a label that contains, among other information, the

FCC registration number and Ringer Equivalence Number (REN)

for this equipment. You must, upon request, provide this informa-

tion to your telephone company.

If your telephone equipment causes harm to the telephone net-

work, the Telephone Company may discontinue your service

temporarily. If possible, they will notify in advance. But, if

advance notice isn’t practical, you will be notified as soon as

possible. You will be informed of your right to file a complaint

with the FCC.

Your telephone company may make changes in its facilities,

equipment, operations, or procedures that could affect proper

operation of your equipment. If they do, you will be notified in

advance to give you an opportunity to maintain uninterrupted

telephone service.

The FCC prohibits this equipment to be connected to party lines or

coin-telephone service.

In the event that this equipment should fail to operate properly,

disconnect the equipment from the phone line to determine if it is

causing the problem. If the problem is with the equipment, discon-

tinue use and contact your dealer or vendor.

The FCC also requires the transmitter of a FAX transmission be

properly identified (per FCC Rules Part 68, Sec. 68.381 (c) (3)).

9.2 FCC Class B Statement

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against