User guide

9
After Sales Support
UK/N.IRELAND HELPLINE N
O
:
REP.IRELAND HELPLINE N
O
:
WEBSITE:
EMAIL:
01270 508538
1800 995 036
www.quesh.co.uk
[e-mail]
Radio Operation
TA - (Traffic Anouncement)
Press and hold the TA button so that the unit will
receive traffic announcement from local radio
stations.
To choose the TA mode, press the VOL dial for
2 seconds, the display will show “TA SEEK”.
Rotate the encoder volume to choose between
the TA SEEK and TA ALARM, after chooisng,
please leave the unit idle for the mode to activate.
In TA SEEK mode, the unit will seek for traffic
announcement program when TA is pressed.
When in TA ALARM mode, no TA/TP is displayed
and the alarm is set off.
PTY - (Program Type)
This radio will allow you to select the type of
program required, and will search for a station
broadcasting that type of program. Press and
hold the PTY button once to show the music
type. Then press 1-6 button to choose the
different music types available.
Press the PTY button twice to show the speech
type program. Then press 1-6 button to choose
the different speech type program. Each number
key will show 3 different speech programs for you
to choose.
Mask DPI - Mask ALL
Press the VOL button for 2 seconds, the display
will show the clock. Press the VOL button again
so that the unit will show “MASK DPI”. Rotate
the encoder volume to toggle between MASK
DPI and MASK ALL mode. Then leave the unit
idle for the mode to take effect. During MASK
DPI mode, the unit will mask only the AF which
has different PI, this is the default mode; during
MASK ALL mode, the unit will mask the AF which
has different PI and no RDS signal with high field
strength.
Retune S/L - (Short/Long)
This function is to set the initial duration of auto-
matic TA Search. Press and hold the VOL dial
until the clock is shown on the display, then press
the VOL dial to cycle through the menu selec-
tions until “RETUNE_S” is shown, rotate the VOL
dial to choose “RETUNE_S” or “RETUNE_L”. The
default is “RETUNE_S”.
PI Sound/Mute
Press and hold the VOL dial until the clock is
shown on the display, then press the VOL dial
to cycle through the menu selections until “PI
SOUND” is shown. This will stop any conflicting
AF sources that may bounce around in built up
areas and any phenomenon that could cause the
same effect.
Area
Press and hold the VOL dial until the clock is
shown on the display, then press the VOL dial to
cycle through the menu selections until “AREA”
is shown. This will allow you to either listen to
your radio in the E.U. or U.S.A.
RDS Operation
This unit is equipped with the latest technology
of EON control, so that when you are listening to
Radio or CD, if there is any travel announcement
from a nearby local station, the radio will already
know the frequency of that radio station. Then
it will receive the station, turn up the volume,
or interrupt the playback of the music for the
duration of the announcement. At the end of the
announcement the radio will return to its previous
state ready for the next announcement.
Advanced Menu Cycle
Press and hold VOL till clock appears then quickly press it again to cycle to the next option.
Clock > AF > TA Seek > PI Sound > Retune > Mask > Area