VER1.
Installation & Safeguards INSTALLATION & SAFEGUARDS All the safety and operating instructions should be read before the unit is operated. Environment Condition for Installation To prevent electric shock or other hazard, do not expose units to rain, moisture, or dust. This unit should be located in an area with low humidity and a minimum of dust.. Place this unit in a well-ventilated place and do not place heat-generating objects on this unit.
Contents Contents CHAP. 1 Features & Package Contents ---------------------------------------------------------------- 4 1-1. Features ---------------------------------------------------------------- 4 1-2. Package Contents ---------------------------------------------------------------- 5 Function of Each Button ---------------------------------------------------------------- 6 2-1. Front ---------------------------------------------------------------- 6 2-2.
Contents CHAP. 5 Set Up ---------------------------------------------------------------- 19 5-1. Entering the Menu ---------------------------------------------------------------- 19 5-2. Display Setup ---------------------------------------------------------------- 20 1) Screen Display ---------------------------------------------------------------- 20 2) Monitor Setup ---------------------------------------------------------------- 20 5-3.
CHAP. 1 Features & Package Contents CHAP. 1 Features & Package Contents 1-1.
CHAP. 1 Features & Package Contents 1-2. Package Contents 1. DVR Main Unit 2. Remote Controller 3. Power Cable 6. Software CD 4. Power Adapter 7. Rubber Pad 8. HDD absorber 5. User’s Manual 9. Battery for remote controller Package Contents 10. Bolts Description 1. DVR Main Unit STAND-ALONE DIGITAL VIDEO RECORDER 2. Remote Controller DVR control 3. Power Cable AC power supply to adapters for 12 V DC power 4. Power Adapter 12 V DC power supply 5. User’s Manual User’s Manual 6.
CHAP. 2 CHAP. 2 Function of Each Button Function of Each Button 2-1 FRONT Name Function ① LED Lamps Shows status of operation ②-1 USB HOST Back-Up by connecting USB Media to USB HOST ②-2 USB Device Firmware upgrade by connecting PC with latest firmware to USB port ③ IR IR receiver ④ Camera selection & PTZ camera control 1. Pressing this button will display a full screen image of that camera 2.
CHAP. 2 Function of Each Button Name ⑦ LIVE View Control Function PTZ ZOOM Zooming an image FRZ Freezing an image MODE Switch to split display MODE button changes screen-division from (to) full screen to (from) 16-split screen. PIP Display in PIP (Picture in Picture) mode SEQ Auto camera image sequencing in full screen mode K.LOCK Q.
CHAP. 2 Function of Each Button 2-2. REAR Name 1 Function RS 485 Connection with PTZ Camera or other external device using RS 485 interface RELAY Output Relay out terminal SENSOR Input Sensor input terminal 2 VGA Connection to VGA Monitor (CRT type or TFT LCD monitor) Just in case you purchased DVR with VGA option board fixed on the main board of DVR, you can connect VGA Monitor to DVR unit.
CHAP. 3 CHAP.3 Installation 3-1.
CHAP. 3 Installation 3-2. Detailed Installation 1) Rack mount 1. Remove 4 bolts on each side cap to install rack mount. 2. Attach rack mount bracket to DVR. 3. Attach DVR with rack mount bracket to 19” rack. 2) HDD HDD fix Connection of HDD Cable MAIN BOARD I/O BOARD I/O BOARD MAIN BOARD HDD1 HDD2 HDD1 HDD2 CD -RW ( MASTER ) x x x x x x x x x x x x 1. Connect Main Board and HDD using SATA HDD data cable and HDD power cable. 2.
CHAP. 3 Installation 3) Camera Connect cameras to the camera input on rear panel of DVR marked CAMERA IN. 4) Monitor VIDEO A IN OUT VIDEO B IN OUT VIDEO C IN OUT Connect the video output marked MONITOR to Video-In of Main monitor. 5) Power Connect one DC 12V, 6.67 A Adaptor to the back side of Power Jack for right operation of 2HDDs and CDRW.
CHAP. 3 Installation 6) SPOT, VIDEO PRINTER Connection with additional composite monitor 7) Other External Device RS-232C : Control DVR through RS-232C port by using PC. RS-485 : Control external device like PTZ Camera. (Pin No.1 & No.2 at Terminal Block). RELAY Output : Relay Output. (Pin No.3 ~No.5 at Terminal Block) SENSOR Input : SENSOR Input (Alarm connection) – (Pin No.6 ~ No.26 at Terminal Block) ETHERNET : Connection to LAN, WAN, Internet.
CHAP. 4 Operation 4-1. System Log-In DVR LOG-IN 1) To enter into the setup menu, press the [MENU] button. 2) Enter password with channel number button from No.1 to No.10 on the front of the DVR unit. (Maximum of 8 digits are available) ENTER PASSWORD ________ 3) After inputting the password, press the [ENTER] button. INPUT YOUR OWN PASSWORD TO EXIT, PRESS [MENU] Administrator : If the password entered matches previously set password, “ LOGIN ADMIN” message appears and you can enter into SYSTEM SETUP.
CHAP 4. Operation 4-3.
CHAP. 4 Operation 2) View in Sequence Press [SEQ] button. It automatically displays full screen images in sequence. CH16 …… ● ● CH02 ● CH01 3) Picture in Picture(PIP View) When it is in full screen display mode, you can see other camera in a small window by pressing [PIP].The other camera in small window is rotating in sequence to next number of camera and you can set the rotating time interval as per the procedure in SYSTEM MENU-CONFIGURATIONINTERVAL SETUP.
CHAP. 4 Operation 4-5. Record Recording mode set before delivery by manufacturer (Default recording mode) is Schedule Recording. In this default recording mode, it records 24 hours/day continuously in weekday and on the weekend. Once you press the [REC] button while you see live view, the record type is changed to Emergency Record mode.
CHAP. 4 Operation 4-7. Search Press [SEARCH] button, and 3 different methods for searching recorded data are available as shown in following SEARCH window. For selecting searching method, use direction key or Jog/Shuttle. After selecting each search method, press [ENTER] button for playback. exit, press [MENU] button. 1) SEARCH BAR Search by percentage of total recorded data. It starts from image corresponding to set % of data on the search bar. 2) TIME/DATE Search by time & date.
CHAP. 4 Button PTZ command Button PTZ command 1/ON LIGHT ON 10/CLEAR PRESET CLEAR 2/OFF LIGHT OFF 11/GOTO PRESET GOTO 3/OPEN IRIS OPEN 12/AUTO AUTO SCAN 4/CLOSE IRIS CLOSE 13/F1 ~ 16/F4 FUNCTION 5/NEAR FOCUS NEAR UP BUTTON TILT UP 6/FAR FOCUS FAR DOWN BUTTON TILT DOWN 7/WIDE ZOOM IN LEFT BUTTON PAN LEFT 8/TELE ZOOM OUT RIGHT BUTTON PAN RIGHT 9/SET PRESET SET Operation 4-9. Data Back-Up Enter into SYSTEM MENU-BACKUP-CD-R SETUP.
CHAP. 5 Set Up CHAP. 5 Set Up 5-1. Entering into the Menu Enter into SYSTEM MENU by pressing [MENU] button.
CHAP. 5 Set Up 5-2. DISPLAY SETUP Setting up parameters for monitor and display on screen. Enter into SYSTEM MENU-DISPLAY SETUP. DISPLAY SETUP LIVE PLAYBACK SCREEN DISPLAY MONITOR SETUP VGA SETUP COLOR BAR TEST SELECT MENU : ▲▼, & [ENTER] 1) SCREEN DISPLAY 1 2 Setting up the screen display in LIVE mode and PLAYBACK mode. 3 4 Select the sub-menu which you would like to set using direction buttons and then change ON/OFF with [ENTER] button. 1. TIME/DATE : Display time & date 2.
CHAP. 5 Set Up 5-3. CONFIGURATION Various parameters for system can be set in CONFIGURATION menu. Enter into SYSTEM MENU-CONFIGURATION and press the [ENTER] button.
CHAP. 5 Set Up (3) HDD CHANGE SETUP Without losing data, user can use HDD from other DVRs, and HDD installed current DVR can be used to other DVRs. HDD CHANGE SETUP SAVE DVR INFO LOAD DVR INFO SELECT MENU : ▲▼, & [ENTER] 1) SAVE DVR INFO Once you press ENTER button on "SAVE DVR INFO" , the DVR information will be saved on HDD. If the DVR information is saved properly, you can see "NOW CHANGE HDDDISK" message on DVR. Then power off the DVR and change with new HDD.
CHAP. 5 Set Up 2) TIME/DATE SETUP Set time and date of DVR system which is very important for search with time and date of the event. Time and date set by manufacturer is different from local time of user, and user must set time and date exactly in the first operation. Set time & date using direction buttons and [-][+] button or Jog shuttle 2.
CHAP.
CHAP. 5 Set Up INTERVAL SETUP 4) INTERVAL SETUP SWICHING INTERVAL Set the switching time interval for SEQ or PIP function.(1 sec. ~ 99 sec.) (1)FULL SCREEN : set the sequencing switch time interval in live full screen. (2)PIP SCREEN : set the sequencing switch time interval of PIP window. FULL SCREEN 01 SEC PIP SCREEN 01 SEC EVENT RECORD EVENT UPDATE TIME 01 SEC SELECT ▲▼◀▶, CHANGE VALUE : - + (3)EVENT UPDATE TIME : Set the minimum time interval of event to be listed in EVENT LIST.
CHAP. 5 Set Up 6) BUZZER SETUP BUZZER SETUP Set parameters for buzzer (On or Off). Use direction button and [ENTER] button. KEY BEEP : buzz when button is pressed. VIDEO LOSS : buzz when video signal is lost. ALARM ACTIVE : buzz when alarm is activated. MOTION DETECT : buzz when motion is detected. ALL ON KEY BEEP ON VIDEO LOSS ON ALARM ACTIVE ON MOTION DETECT ON User can set all buzzers at On/Off at once by set ALL at ON/OFF. SELECT : ▲▼, & [ENTER] 7) PASSWORD SETUP Set user ID and password.
CHAP. 5 Set Up 5-4. RECORD SETUP This is the most important configuration of the DVR. Enter into SYSTEM MENU-RECORD SETUP and press the [ENTER] button. 1) RECORD CONFIGURATION Use direction button to move and [-] [+] button to set value. RECORD SETUP RECORD CONFIGURATION SCHEDULE SETUP HOLIDAY SETUP (1) OVERWRITE : Set overwrite or stop recording when the HDD is full.
CHAP. 5 Set Up 2) SCHEDULE SETUP Unless you selected other recording mode, DVR system records in Schedule Recording mode. In SCHEDULE REC SETUP, you set type of recording for every time interval of 2 hours in each day of the week. Schedule Recording set by manufacturer is recording continuously at its full recording speed, and it means DVR system record continuously at 60 ips in total at 720x240 resolution.
CHAP. 5 Set Up 5-5. BACK-UP 1) CD-R SETUP User can back up the recorded data to CD using CD writer installed in DVR. Refer to [START] and [END] of data on HDD and set copy from time, [START], and size of data copied, [SIZE], and move to BURN and press [ENTER] button to start copy.
CHAP. 5 Set Up Partition can be selectable by Ch button 1~4.
CHAP. 5 (2) DDNS SETUP : - DDNS ON/OFF : Select if DDNS Function use - DDNS SERVERS : IP Address of DDNS SERVER. - INTERVAL : Registered time period to DDNS SERVER. Per D(Day) H(Hour) M(Minute) - REGISTER : Once press [ENTER], It automatically registered.
CHAP. 5 Set Up (5) EVENT SERVER SETUP : IP ADDRESS : IP Address of PC that executes EVENT SERVER PROGRAM. IP PORT : PORT of PC that executes EVENT SERVER PROGRAM EVENT SERVER TYPE : It is the way to transmit data to SERVER By "OFF", "EVENT", "MINUTE“, In case Event happens from DVR. EVENT SERVER SETUP IP ADDRESS IP PORT EVENT SERVER TYPE INTERVAL EVENT GMT TYPE 192.168.001.072 09988 OFF --GMT+00:00 "EVENT“: It transmits by the number of EVENT. "MINUTE“: It transmits each scheduled time.
CHAP. 5 Set Up 4) SPOT MONITOR SETUP (1) SWITCHING INTERVAL Channel switching time (01 sec. ~ 99 sec.) SPOT MONITOR SETUP SWITCH INTERVAL ALARM POP UP MOTION POP UP EVENT POP UP DURATION (2) ALARM POP-UP When ALARM is detected, the image of channel connected with Alarm sensor pops up.
CHAP. 5 5-7. FACTORY DEFAULT FACTORY DEFAULT Set the all system parameters as manufacturer first set before delivery. It is a kind of system initialization, and manufacturer recommends to do it when you add new HDD or other changes in system to make all system ready for normal operation. Use direction button to move and Press [ENTER] button to change parameters. After move to RUN, Press [ENTER] button for actual Factory Default setting.
CHAP. 6 Network Setup CHAP. 6 Network Setup 6-1. DVR Network Configuration Please call your provider to identify what type of service they are providing you.
CHAP. 6 Network Setup 1) Static IP User input IP address in IP CONFIG SETUP which is assigned from ISP company. 1. Verify if IP address is OK or not with PC before connecting DVR. 2. Connect LAN cable to DVR after confirmation. 3. DVR : MENU EXTERNAL DEVICE TCP/IP 4. Set DHCP to MANUAL and go into TCP/IP SETUP. 5. Verify if MAC ADDRESS starts from 00-0A-A2…. 6. Input IP address which is assigned from ISP company. 7. Set IP PORT. (50000 recommended) 8. Input GATEWAY which is assigned from ISP company.
CHAP. 6 Network Setup 2) Dynamic IP 1. Verify if IP address is OK or not with PC before connecting DVR. 2. Connect LAN cable to DVR after confirmation. 3. Turn off and on Modem (Router) which is provided by ISP company. This is to reset client of MAC from ISP company. User have to wait for 30 seconds after turning on. 4. Turn off and on DVR. 5. DVR : MENU EXTERNAL DEVICE TCP/IP 6. Verify if MAC ADDRESS starts from 00-0A-A2…. 7. Set DHCP to AUTOMATIC and detect IP to get Dynamic IP. 8.
CHAP. 6 Network Setup 3) Dynamic IP of PPPoE (DSL) DVR doesn’t support DSL (PPPoE), user have to set NETWORK with IP SHARE if user need to access DVR remotely. At this time, User have to port forward on DVR. Please contact IP SHARE Manufacturer if you need to know how to forward port. Even though user have Static/Dynamic IP, if user want to use another device (PC) through IP SHARE, user can set NETWORK as follows, 1. Verify if IP address is OK or not with PC before connecting DVR. 2.
CHAP. 6 Network Setup 6-2. Remote Viewer program MAIN INTERFACE 1 6 7 8 5 2 3 4 ①- Power button : Press the Power switch to exit the program. Please disconnect the live feed before powering off the software ②- Connect button : Press the Connect button to view the live images from the DVR. These are the same images being displayed on the monitor of the DVR, with a delay depending on your internet connection at both the DVR location and from where you’re currently accessing.
CHAP. 6 Network Setup IP/PORT Setting Screen IP List MANUAL DDNS Input IP address and PORT manually Receive IP address and PORT from DDNS Server. For further information of DDNS, please contact your vendor. Name Address PORT ID Password Name of IP address on the list. Input IP address which is set on DVR Input PORT which is set on DVR Input ID which is set on DVR. (Please input ‘admin’.) Input password which is set on DVR IP List It shows IP list which user input manually.
CHAP. 6 Network Setup PTZ/SAVE Setting Screen Circular Monitoring Interval : This indicates the speed of the channels sequence when the SEQUENCE button is used from the main interface. Scan Rate : Set speed of playback. PTZ TYPE : Select PTZ camera which is connected to DVR. PTZ Baud Rate : Enter the Baud Rate of your PTZ camera. Set Path to Save Downloaded image : Determines the location and folder on your PC where the downloaded video clips are stored.
CHAP. 6 Network Setup PLAYBACK INTERFACE through Remote Viewer 2 1 3 7 8 9 10 4 6 5 Function of each button in Search window. ① Exit : Exit to live window. ② Full screen : Select a certain camera to view in full screen. ③ Quad : To view quad mode (4 channels at the same time) ④ Time : The recording time & date information of the pictures which is being played. ⑤ Channel selection : Select each camera. ⑥ Time selection : Select a time from which user want to see.
CHAP. 6 Network Setup : Play fast backward : Move to the start of recording : Play backward(1X) : Move to the previous hour : Play forward(1X) : Move to the afterward hour : Play fast forward : Move to the end of recording : Stop playback ⑨ Command button. a) SAVE : After pressing the Stop button, click SAVE button to save the currently viewed image in jpg format. b) PRINT : After pressing the Stop button, click PRINT button to print the currently viewed image.
CHAP. 6 Back-up CD Player 6-3. Back-up CD Player 1 9 2 3 10 b e c 4 g d a f 8 5 7 6 DVR units are with a built-in CD-RW, and user can copy images to CD. Using back-up CD player, user can see images on back-up CD, and function of each button in Back-up CD player is as below. ① Time : Current time. ② Status Window : Start & End of time & date, Status of operating button. When user play forward/backward, recorded time will appear.
CHAP. 6 Back-up CD Player ⑩ When you open the file, audio menu OSD will come up automatically. - on : check to output recorded sound, then choose the audio channel 1,2,3 or 4 - skip : skip images forward. * During playback, you can control only. * During playback, only one channel is displayed and can not be changed to multi or full screen.
CHAP 7. DDNS Web Server CHAP. 7 DDNS Web Server * Register DVR for DDNS Web-server and set DVR as shown below, 7-1. Registering DVR for DDNS (DDNS WebWeb-server) 1) Please access www.j2kip.com and Register Member ID. 2) Please click DVR Add to register DVR.
CHAP 7. DDNS Web Server 3) Please click confirm after inputting DVR Name & Mac Address. 4) Now, DVR is listed on DDNS Web Server without IP and Port number.
CHAP 7. DDNS Web Server 7-2. DDNS Set Up in DVR * The following setting is a sample for a cable modem connected to DVR directly. 1) Click Menu and Enter into ‘LOGIN -> EXTERNAL DEVICE -> TCP/IP SETUP’ 2) Go to IP Config Setup, if user set DHCP ‘Automatic’, it detects IP address automatically. IP CONFIG SETUP MAC ADDRESS ___________ 00-0A-A2-00-00-00 ___________ 192.168.001.160 ___________ 50000 ___________ 192.168.001.001 ___________ 255.255.255.
CHAP 7. DDNS Web Server 4) Set DDNS ON/OFF “ON”. IP address which is assigned from DHCP Server is automatically input on DNS Server. DDNS SETUP DDNS ON/OFF OFF DDNS SERVER 211.062.253.087 INTERVAL D-00 H-00 M-20 REGISTER -------------------------------------------------------------------------DDNS STATUS ---.---.---.
CHAP 7. DDNS Web Server 6) Go to your PC again after you see “SUCCESS TO REGISTER DVR INFO.” and then Click ‘refresh’ button. Then, DDNS Server automatically catches your DVR’s IP address and Port number. Note. Before using Web-Viewer, please add www.j2kip.com on Trusted Sites at first installation as follows.
CHAP 7.
CHAP 7. DDNS Web Server 7-3. Web Program *If ActiveX control installation is required for the first time access,please click ‘Yes’. Click these icons, then it connects to DVR automatically via DDNS Server. Input information needed for network connection to DVR manually. VIEWER BACKUP PLAYER Enables to show live image display. Enables to back up recorded images in DVR to your PC. Enables to back up recorded images on your PC.
CHAP. 8 Specifications CHAP.
CHAP. 9 Remocon Key Definition CHAP.
MEMO : 55
MEMO : 56
MEMO : 57
16Channel Stand Alone DVR Audio, USB Backup available Best Picture Quality - JPEG2000 58
