4CH STANDALONE DVR M A N U A L 2009 AUG. Ver 1.
HDD SUPPORT LIST Warning: Should you wish to install a new hard drive in this unit, a list of tested hard drives shown to be compatible can be found below.
USB FLASH DISK SUPPORT LIST Warning: We recommend having the USB flash disk by using the following USB flash disk support list to ensure the compatibility with the DVR and best performance.
CONTENTS 1、FEATURES 1 2、SPECIFICATIONS 2 3、INSTALLATION 3 4、FRONT PANEL 4 5、OPERATION MENU 5 6、BACKUP 13 7、RECORDING PROCEDURE 14 8、4-CH CONTINOUS RECORDING 14 HOURS ON SATA 400GB HDD 9、DVR VIEWER USER GUIDE 15 10、REMOTE CONTROL GUIDE 17
1、FEATURES 1、Triplex (Recording, Playback, Network simultaneously) 2、Up to 60fps Recording Speed。 3、USB flash disk backup。 4、Adjust Up/Down/Left/Right screen position。 5、Video Input Signal: NTSC / PAL。 6、Video Compression: Modified MJPEG 7、Manual, Motion, & Programmed。 8、Motion Detection with Adjustable Time Duration。 9、Search Data by Date and Time。 10、Power Recover Auto Restore Record Mode。 11、Hard Disk LED Indicator When Recording。 12、Motion Detection。 13、Audio Recording。 14、SATA Hard Disk。 15、Remote Cont
2、SPECIFICATIONS Video Format Operating System VGA Output Video Input Audio Input Video Output Audio Output Language NTSC/PAL Embedded RTOS D-SUB 15Pin VGA BNC x 4 (1Vp-p 75Ω) RCA x 1, Line-In BNC x 1(Main Monitor) RCA x 1, Line-Out Multi-Language NTSC 120 fps (4 × 30 fps) Display Frame PAL 100 fps (4 × 25 fps) NTSC Max. 60 fps Recording Frame PAL Max.
3、INSTALLATION REAR PANEL (9) TYPE 1 (8) (4) AUDIO IN DEFAULT LAN DC12V VIDEOOUT 1 3 2 (2) (9) TYPE 2 4 VIDEOIN AUDIO OUT (3) (5) (8) (4) (6) (7) AUDIO IN DEFAULT LAN DC12V XGA VIDEOOUT (1) (2) 1 3 2 4 VIDEOIN AUDIO OUT (3) (5) (1) XGA Output (TYPE 2) (2) Video Output: BNC x 1 (3) Video IN: BNC x 4 (4) Audio Input: RCA x 1, Line-In (5) Audio Output: RCA x 1, Line-Out (6) Host USB (7)Power Input: For safety reasons, always use the original factory power adaptor attached.
4、FRONT PANEL (1) (2) (3) (4) (5) (6) (7) (8) (9) (1) Up Arrow/CH1: Navigate up through menu options/ Camera 1 full screen display (2) Down Arrow/CH2: Navigate down through menu options/ Camera 2 full screen display (3) Left Arrow/CH3: Navigate left through menu options/ Camera 3 full screen display (4) Right Arrow/CH4: Navigate right through menu options/ Camera 4 full screen display (5) Menu: Main menu/ Show percentage of the hard drive used.
5、OPERATION MENU Type A ( Without Network ) Setup Camera Record Motion Detection Screen Audio System Search Language Exit English 2008/07/01 13:21:14 Type B ( With Network ) Setup Camera Record Motion Detection Screen Audio System Network Search Press to select items t Language English u Exit Use to enter 2008/07/01 13:21:14 Press MENU to exit Camera Setup Channel Channel Name Display Brightness Contrast Hue Saturation Camera t 1u CH1 on Press Use 2008/07/01 13:21:20 to select items to enter Press M
Record Setup Record Record Speed Record Quality Event Rec Duration Record Schedule High 10 2008/07/01 13:21:24 Press to select items Use to enter Press MENU to exit (1)Record Speed: Set the number of frame per second (fps). NTSC:default: 15 fps,maximum total frame: 60 fps. PAL :default: 12 fps,maximum total frame:50 fps. (2)Record Quality:Choose video record quality: Highest, High, or Normal. (3)Event Rec Duration:5、10、15、20、25、30 seconds, default: 10 seconds.
Motion Detection Setup Motion Detection Setup t Channel 1u Sensitivity Off Alarm Duration Off Motion Area Smart Record Off 2008/07/01 13:21:36 Press to select items Use to enter Press MENU to exit (1)Channel:The diagram above shows Channel 1. (2)Sensitivity:To set Off, or 1 to 4, default: Off. (3)Alarm Duration:To set alarm duration when alarm is triggered by a moving object: Off, 5, 10, 15, 20, 25, 30 seconds, or continuous. (4)Motion Area:To select motion detect area.
Audio Audio Record Mute Input Volume Output Volume on off 2008/07/01 13:21:50 Press Use to select items to enter Press MENU to exit (1) Record: On/Off (2) Mute : On/Off (3) Input Volume: A djust input volume (4) Output Volume: Adjust output volume. System System Hard Disk Setup Password Change Time Set Event List Password Check off Buzzer Alarm off F/W Upgrade (DVR0460.
(1) Hard Drive Disk Setup Hard Drive Disk Setup Overwrite Enable Format HDD Size : 238463MB Used: 4737MB 1% DISK0: 238463MB Yes ST3250824AS PRESS (Ch4) TO STOP RECORDING FIRST 2008/07/01 13:21:50 Press to select items Use to enter Press MENU to exit (1.1) Overwrite Enable: Enable overwrite when HDD capacity is full: Yes: When HDD overwrite is taking place, the data is stored in duration of 4 hours per event and being recorded continuously. No: Stop recording (1.
(3) Time Set Time Set Time Set Apply 2008/07/02 14:08:37 2008/07/02 14:21:50 (3.1)Time Set:YYYY/MM/DD HH:MM:SS (3.2)Apply:Update and save all changes. (4) Event List Event List 005 08/07/01 13:24:32 005 08/07/01 09:42:32 005 08/07/01 09:42:32 005 08/07/01 09:42:32 005 08/07/01 09:42:32 REC START REC STOP REC START REC STOP REC START PAGE (01/01) u t 2008/06/27/ 09:41:30 (1) You may choose an individual event from the recorded event list.
(7) F/W Upgrade: F/W Upgrade 1.5.7 1201 1.5.7 1201 Current Ver NEW Ver Firmware Reading....... 2008/07/01 13:36:46 Please save updated firmware on a USB flash drive. Stick it into USB port. The screen will show both current version and new version of firmware. ● When update is in progress, please DO NOT operate the unit or remove the USB flash drive to prevent malfunction or system error. After it is completed, turn off and restart the unit. ● There must have a hard drive to store new firmware.
Time Search Start End Time Search 2008/07/04 09:56:11 2008/07/07 16:12:44 2008/07/04 09:56:11 (CH1,CH2)SET (CH3,CH4)SELECT (MENU)EXIT (PLAY)PLAY 2008/07/01 14:21:50 (1)Set Search of time, then press "play" button to start playback. (2)Playback: *Press button for fast forward. Press one more time for faster speed. Total three variable speeds. *Press button for fast reverse. Press one more time for faster speed and total three variable speeds. *Press button to pause. *Press button to stop playback.
6、BACKUP CH1 CH2 Start End Size 2008/07/01 13:31:20 2008/07/01 13:31:21 192 KB CH3 CH4 USB BACKUP MODE (CH1) Start Time, (CH2) End Time (CH4) Start Backup, (STOP) EXIT 2008/07/01 13:31:23 (1)Stick USB flash Drive into USB port (2)Press “ ” button, (3)Press “ ” button to enter backup menu (4)Press “ ” button to setup start time. (5)Press “ ” button to setup end time. After setting up both start and end time, the machine will indicate the size of the file.
7、RECORDING PROCEDURE (1)Press button to start recording. The symbol, will appear on the top right hand corner of each channel in the screen that indicates it is recording live regardless the recording mode is set on continuous or motion recording.
9、DVR VIEWER USER GUIDE 1.Playback Recorded File (1.1)Start VVF SLPlayer (1.2)Point the cursor in the screen and right-click “Open File”. Pick and choose the file you want to view in ( .vvf) and play. 2.Capture an image (2.1) During the playback of the backup file, click “Pause”, located on the bottom of the screen. (2.2) When the image is staying still in the screen, press the right button on the mouse, then pick and choose 「Capture」/「Mark In」. This will set the starting time. (2.
3. Convert File to AVI Format (3.1) Point the mouse cursor to the screen, and press the right button on the mouse, pick and choose「Export」/「AVI」 (3.2) Set Input/Output File 、Compression、Export Channel and Audio. (3.3) Click “OK” to start converting file to AVI format. 4. Options (1) Always on top:The sub window always stays on top. (2) Use DirectDraw:DirectDraw, a part of Microsoft's DirectX is used to render graphics in applications where top performance is important.
10、REMOTE CONTROL GUIDE (OPTION) CH2 display CH1 display Record CH3 display Quad display/ Sequence Switch CH4 display MUTE MENU Navigator SET Fast Reverse Fast Forward Play Stop record/ Stop playback Pause t 17u
4CH STANDALONE DVR M A N U A L H12C460V01