User manual

4CH STANDALONE DVR
- 11 -
Introduction
This document is the Operation Manual for the 4 CH Stand Alone DVR PCViewer.
The application will show you stream image stored in the Storage Device (HDD, CF card,
USB Memory Stick, etc.), which was previously formatted and recorded by the DVR.
If any DVR-formatted Storage Device is connected to your PC, the application will
automatically detect the Storage Device and show the recorded stream. You can also
save the current screen to a JPEG file, and save the video/audio stream to a file
[MYS file, the Vineyard's proprietary video/audio stream file format.
The application consists of two functional modules:
DVR PC Viewer Shows stream stored in the DVR Storage Device.
MYS File Player Plays captured stream file.
Terms in This Document
Storage Device
The Application
OS
CPU
RAM
GUI
Hard Disk, CF Card, USB Memory Stick
DVR Storage Device PC Viewer
Operating System
Central Processing Unit
Random Access Memory
Graphic User Interface
DVR Storage Device Storage Device which was previously formatted and recorded by the
DVR base on Vineyard Technologies' DVR chip.
Requirement
OS
DirectX
OS of your PC should be Windows 2000(SP4) / XP(SP2) or later.
Your PC should be equipped with DirectX 7.0 or later.
Recommendation
Operating System (OS)
CPU
RAM
The application runs only on Windows 2000 (SP4) / XP (SP2) or later
1.0 GHz or Higher.
256 MByte or greater.
10、DVR PC Viewer User Guide
Installation
A. Hardware Installation
Before executing the application, connect the DVR Storage Device to the IDE cable of your
PC directly, or via USB adaptor
B. Software Installation
Run Setup.exe in the CD-ROM and follow the instruction to finish the installation.
[Make sure that the OS of your PC is Windows 2000 SP4/Windows XP SP2 or later.