4 Channel Standalone DVR USERS MANUAL
CONTENT FEATURE 1 FRONT PANEL 1 REAR PANEL 2 CONTROL PANEL BUTTON 3 SPECIFICATIONS 5 OPERATING MANUAL 6 VIEW CONTROL 10 PLAYBACK CONTROL 10 RECORD CONTROL 11 4 CHANNEL RECORDING HOURS 11 DVR PC VIEWER 12 REMOTE DVR CLIENT 19 ALARM & LOOPING CABLE 31
■ FEATURE 1、 Definitely Standalone. 2、 Real Time Refresh Rate. 3、 Display While Recording. 4、 Frame Recording & Quad Recording. 5、 Support Audio Recording. 6、 Small Size Design. 7、 Anti-Shock HDD Mobile Rack. 8、 Advanced MJPEG. 9、 Manual / Motion / Programmed Recording. 10、 Search by Time / Date. 11、Watch dog feature. 12、HDD Volume Indicator. 13、Internal motion detect feature. 14、Auto switching function.
■ REAR PANEL VIDEO OUT AUDIO MONITOR VIDEO IN CH1 CH3 CH2 CH4 IN DC12~24V VCR ★ OUT The standard for car usage VIDEO OUT AUDIO MONITOR VIDEO IN CH1 CH3 CH2 CH4 IN DC12V ALARM I/0 USB ◆ VCR VIDEO LOOP OUT The standard for home usage VIDEO OUT AUDIO MONITOR LAN VIDEO IN CH1 CH3 CH2 CH4 IN DC12~24V ALARM I/0 USB ● VIDEO LOOP VCR The advanced for home usage .2. OUT
■ CONTROL PANEL BUTTON CONTROL BUTTONS in the VIEW MODE Menu: Enter the MENU MODE for the system setup. (Recording and Playback needs to be stopped before entering the MENU MODE) Record: Activate the recording. Play: Playback the latest video stream which you haven't seen before. Auto Switching Channels: Enable / Disable the auto switching function. Quad Display: Monitor will be displayed as a quad display. Channel 1: Channel 1 will be displayed as full screen.
CONTROL BUTTONS in the PLAY MODE Search Mode: Enter the PLAYBACK EVENTS SEARCH MODE. Play: Play the video stream in normal speed. Pause: Pause the playing. Stop: Stop the playing, and go back to the VIEW MODE. Channels Switching: Switch CH1→CH2→CH3→CH4 as full screen and press again to show the quad display. Forward Fast: There are 3 speeds for fast forward. (Ff1→ Ff2 → Ff3) Steps Play: Play the video stream frame by frame. Rewind Fast: Rewind Fast function.
■ SPECIFICATIONS NTSC Video Input PAL 4CH Composite Video Input Channel 2CH Composite (VCR OUT / MONITOR OUT) Video Output Channel 120 fps (4x30 fps) 100 fps (4x25 fps) Recording Frame Rate(QUAD) Max . 30 fps Max. 25 fps Recording Frame Rate(EACH) M a x. 7.5fps(30 fps/4) Max. 6.
■ OPERATING MANUAL (MAIN MENU) MAIN MENU ● ◆ SYSTEM SETUP CAMERA SETUP RECORD SETUP RECORD SCHEDULE MOTION SETUP SENSOR SETUP HARD DRIVE SETUP NETWORK SETUP SYSTEM RESTORE PRESS(UP,DOWN), THEN(SELECT) PRESS(MENU) TO EXIT ◆ For the standard for home usage only ● For the advanced for home usage only SYSTEM SETUP SYSTEM SETUP :〔PAL〕 : 2 : 〔ON〕 :〔OFF〕 :〔OFF〕 : 1 SYS T EM STANDARD BUZZER ALARM TIME LOSS ALARM AUDIO RECORD AUDIO MUTE AUDIO CHANNEL PASSWORD SETUP TIME SETUP PRESS(UP,DOWN), THEN(SELECT) PRESS(
is: " 1" is: " 2" is:" 3" is: " 4" is: "5" TIME SETUP Select this item to set up current time.
RECORD SCHEDULE RECORD SCHEDULE TTTTTTTTTTTTTTTTTTTTTTTT : : : : : : : : 0 3 6 9 12 15 18 21 PRESS( REW,FF), THEN(SELECT) PRESS(MENU) TO EXIT (1)Range: 0-24 hrs. (2)Set “T” for continuous recording. (3)Set “M” for motion recording. (4)Set up “ - ” to disable the recording. MOTION SETUP MOTION SETUP MENU CHANNEL-1 CHANNEL-2 CHANNEL-3 CHANNEL-4 SENSITIV AREA SET SENSITIV AREA SET SENSITIV AREA SET SENSITIV AREA SET 0 (OFF) 0 (OFF) 3 . 5 .
1. Setup the First Detective Area First, Press (UP, DOWN, FF, REW ) to Set the UPPER-LEFT Point of the First Detective Area. Then, Press (UP, DOWN, FF, REW ) to Set the DOWNER-RIGHT Point of the First Detective Area. 2. Setup the Second Detective Area First, Press (UP, DOWN, FF, REW ) to Set the UPPER-LEFT Point of the Second Detective Area. Then, Press (UP, DOWN, FF, REW ) to Set the DOWNER-RIGHT Point of the Second Detective Area. 3.Finish.
NETWORK SETUP NETWORK MENU ACCEPT CLIENT MAC ADDRESS IP ADDRESS SUBNET MASK GATEWAY PORT NUMBER ( YES) 00:00:00:73:37:31 192.168.001.090 255.255.255.000 192.168.001.254 14337 14338 PRESS(UP,DOWN), THEN(SELECT) PRESS(MENU) TO EXIT SYSTEM RESTORE System Restore t o the default value. ■ VIEW CONTROL (1)You can use the following view control buttons to monitor the video from the cameras.
(1)EVENTS SEARCH MODE : Press choose one period, then press to play. (2)TIME SEARCH MODE : The signal ”>” goes up to the “HARD DRIVER: MASTER”. Press to select items. Use select to change data, Then press to play. (3)PLAYBACK : * Press to speed forward. Continue to press and show FF(Fast Forward)1, FF2, FF3 playing. * Press to rewind the playback. * Press to pause. * Press to stop. ■ RECORD CONTROL (1)Press to start recording.
DVR PC VIEWER ◆ For the standard for home usage only ● For the advanced for home usage only Introduction This document is the Operation Manual for the 4 CH Stand Alone DVR PC Viewer. The application will show you stream image stored in the Storage Device (HDD, CF card, USB Memory Stick, etc.), which was previously formatted and recorded by the DVR. If any DVR-formatted Storage Device is connected to your PC, the application will automatically detect the Storage Device and show the recorded stream.
Fig.1. No DVR Storage Device Message ■ DVR PC Viewer A. User Interface The default page of the application is DVR Storage Device PC Viewer. The user interface is shown in Fig.2.
B. Functions i. MYS Player Button If you want to see MYS file which was stored in your PC, press this button or press [F2] key. ii. DVR Storage Device Change Button When there are more than one DVR storage devices, this button will be activated. Press this button when you want to see video/audio stream stored in other DVR storage device. Fig.3 shows DVR storage device selection window. Fig.3. DVR Storage Device Selection Window iii.
Press button (or [ 5 or Numpad 5 ] Key) to see all 4 channels at the same time. Press button (or [ 1 or Numpad 1 ] Key) to see channel 1 enlarged. Press button (or [ 2 or Numpad 2 ] Key) to see channel 2 enlarged. Press button (or [ 3 or Numpad 3 ] Key) to see channel 3 enlarged Press button (or [ 4 or Numpad 4 ] Key) to see channel 4 enlarged. v. Viewer Control Buttons Use Viewer Control Buttons to control viewer playback. Fig.6.
vii. Screen Capture Button If you wan to capture the screen, follow the screen capture procedure listed below: * Using “Positioning Slider Bar” find the stream position you want. * Make sure that the playback is in PAUSE mode, and the Screen Capture Button is enabled. * Press the button, then the application will start to make a JPEG file. When a JPEG file successfully created. The application let you know that the image file is created showing the file name and the “Capture Directory” path. viii.
(1) Screen (6) MYS file information (2) MYS File Select Dialog (7) MYS File Playback Control (3) Positioning Slider Bar (8) Screen Capture Button [JPEG] (4) PC Viewer Button (9) Audio Control (5) File Open Button (10) Playback Status Fig.9. MYS File Player User Interface B. Functions i. PC Viewer Button When you want to back to PC Viewer function, press this button. ii. File Open Button Press this button to select MYS file. iii.
vi. Audio Control Fig.11. Audio Control Buttons Press button to enable sound. Once sound is enabled, the button icon will be changed to . Press it to disable sound again. Using the slider bar, you can adjust the volume. ■ Application Setting A. User Interface Enable/Disable Application Closing Confirm Change Captured File Saving Directory Fig.12. Application Setting Dialog B. Functions i. Capture Directory You can specify Capture Directory.
Remote DVR Client ● For the advanced for home usage only Introduction This document describes the operational behavior of the 4 CH Stand Alone Remote DVR Client application. Using this application, you can access to your DVR, control it, and see what's happening remotely. Moreover, you can capture the video on your PC. The application consists of four main functions: Remote Monitoring Shows incoming video/audio stream from your DVR. Remote DVR Management Manage your DVR remotely.
Fig.1. Remote DVR Client ■ Connection Before you connect to your DVR, make sure that your DVR is correctly configured for the network connection. If your DVR is connected to the network and configured correctly, then you can connect to your DVR now. For more information, please refer to DVR operation manual. A. Connection To connect to your DVR, you should know following information: * The IP address of your DVR. * The Password.
Type the IP address and Password and press Connect button. You can save the IP address for future use by checking “Save IP.” Once an IP address saved, the IP address will be the default IP address. If the client is connected to your DVR, you will see the current DVR screen image on the screen and the Status Window Show Current Connection Speed. Fig.2. The Status Window [showing connection speed of 960 Kbps] B. Disconnection To disconnect, press ! button (or press [Ctrl+C] key) again.
■ Audio Control A.Audio Sounding/Mute Press button, or press [Ctrl+M] Key, to activate audio when the client is connected to the DVR or the client is playing pre-recorded stream file. Press button, or [Ctrl+M] Key to deactivate audio. B.Volume Control To adjust audio volume, use the audio volume slider or use [Up] and [Down] Key as well. ■ DVR Control You can make your DVR state to start/stop recording and start/stop playback remotely. DVR control buttons are shown in Fig.5. DVR Control Fig.5.
There are two options for starting DVR playback. i. Timed Play The upper part of the window shows the time range of the stream stored in the DVR HDD. You can specify the time when you are interested in. Fig.8 shows timed play. Fig.8. Timed Play Window ii. Event Play The lower part of the window is event list. To see an event, select the event and double click it or press “Start Event Play” Button. Fig.9. Event Play Window Once DVR play starts, the Status Window will show your DVR is now playing. Fig.10.
Fig.11. PC Capturing Buttons A. Capturing Press button (or press [Ctrl+R]) to start capturing. When it is capturing, the Status Window will show the current PC Capturing State. Fig.12. Status Window [PC Capturing] The captured video/audio stream will be saved in an MYS file. You can specify where you want the captured stream files will be stored.
i. PC Playback Status When the application is in PC Playback mode, you will see playback state indication at the bottom, left. It shows the current PC playback state and current position comparing the whole file size. Fig.15. PC Playback Indicator ii. Stream Position Bar Also, when the application is in PC Playback mode, the Stream Position Bar will appear. Fig.16. PC Playback Stream Position Bar You can specify any position of the file, and the corresponding image will be displayed. iii.
A. Change Client Setting To change the configuration of the client application, select [main menu -> Configuration ->Configure Client] or press [F9] key. Fig.17. Configuration Menu [Client Configuration] Then, you will see following dialog box, which is Client Configuration Manager. With this Client Configuration Manager, you can change the configurations of the client application. Fig.18. Client Configuration Window i.
Fig.19. Stream Capturing Directory Select folder and press OK to change directory. iv.Message Boxes Fig.20. On/Off the confirm message boxes. B. Change DVR Setting To change the configuration of the remote DVR, select [main menu->Configuration->DVR Configuration] or press [F5] key. Fig.21. Configuration Menu [DVR Configuration] Fig.22.
i. Record Mode You can change DVR recording mode. [EACH or QUAD] ii. Record Quality You can adjust stream picture quality. [HIGH NORMAL LOW] iii. Record Frame Rate You can change DVR recording frame rate. iv. Alarm Sounding Duration Select time duration of sounding alarm when a motion sensor is activated or the embedded motion detector detects any movement. v.
If you want to format the HDD, press “Format Master (or Slave) HDD” button. You should know the DVR management password to format the HDD. D.Change DVR Record Schedule To change the record schedule of the remote DVR, select [main menu->Configuration->Record Schedule Set] or press [F7] key. Fig.25. Configuration Menu [Record Schedule] Fig.26. DVR Record Schedule Manager If any change is made, the “OK” button will be activated. Press “OK” to change.
If any change is made, the “OK” button will be activated. Press “OK” to change the time. Press “Cancel” to close the window without changing the DVR time. F. Network Option Fig.29. Network Options You can change the stream transmission mode setting; Select one of following five transmission modes: Favor Highest Picture Quality [Shift+1] In this mode, the DVR is supposed to send highest quality image stream, requiring more transmission bandwidth. Therefore, the frame rate may decreases.
■ ALARM & LOOPING CABLE CH1 CH2 CH3 CH4 1 8 1 BROWN ALM-CH1 2 RED ALM-CH2 3 ORANGE ALM-CH3 4 YELLOW ALM-CH4 5 GREEN ALM-GND 6 BLUE RLY-COM 7 BLACK RLY-NC 8 WHITE RLY-NO .31.
R12C403001