4Ch Real time / Triplex / Mux Stand Alone DVR User’s Manual VER 1.
4Ch Real time/Triplex/Mux - Stand Alone DVR Installation & Safeguards INSTALLATION & SAFEGUARDS All the safety and operating instructions should be read before the unit is operated. Environment Condition for Installation 1 T 1. To preventt electric l t i shock h k or other th h hazard, d d do nott expose units it tto rain, i moisture, i t or d dust. t 2. Place this unit in a well-ventilated place and do not place heat-generating objects on this unit. 3.
4Ch Real time/Triplex/Mux - Stand Alone DVR Contents Contents CHAP. 1 Features & Package Contents ---------------------------------------------------------------- 4 1-1. Features ---------------------------------------------------------------- 4 1-2. Package Contents ---------------------------------------------------------------- 5 Function of Each Button ---------------------------------------------------------------- 6 2-1.
Ch Real time/Triplex/Mux CHAP. 5 - Stand Alone DVR Contents Set up ---------------------------------------------------------------- 18 5-1. General Operation ---------------------------------------------------------------- 18 5-2.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP 1. Features & Package Contents CHAP 1. Features & Package Contents 1-1.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP 1. Features & Package Contents 1-2. Package Contents 1. DVR Main Unit 10. Remote Controller 2. Power Cable 5. Software CD 3. Power Adapter 4. User’s Manual 6. Rubber Pad 7. HDD absorber 8. Bolts Package Contents 9. Mouse Description 1. DVR Main Unit Stand-Alone Digital Video Recorder 2. Power Cable AC power supply to adapters for 12V DC power 3. Power Adapter DC power supply 4. User’s Manual User’s Manual 5.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP 2. Function of Each Button CHAP 2. Function of Each Button 2-1.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP 2. Function of Each Button 2-2.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP.3 Installation 3-1. Installation Configuration 8 CHAP.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP. 3 Installation 3-2. Detailed Installation 1) HDD 1. Connect Main Board and HDD1 using IDE cable and HDD power cable. 2. The jumper setting of HDD should be on Master when you install HDD. 3. Stick the HDD absorber (included in package) on the bottom of case and then install the HDD on top of them by using the bolts (included in package). 4. Screws must be inserted from outside of the case bottom.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP. 3 3)) Monitor Connect the video output marked MONITOR to Video-In of Main monitor.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP. 3 Installation 5) Other External Device RS-485 : Control external device like PTZ camera. (Pin No.8 & No.9 at D-SUB). RELAY Output : Relay Output (Pin No.6 & No.7). SENSOR Input : Sensor Input – Alarm Input (Pin No.1 ~ No.4). ETHERNET : Connection to LAN LAN, WAN tt. 6) RS-232C ASCII-code Following ASCII-Codes (Hexa-Code) are for programmers who want to control DVR unit via the RS232C Port using keyboard of PC. ASCII-Code is 1 Byte.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP. 4 Operation 4-1. System Log-In 1) Move a cursor to lower right hand corner of display by using a mouse, then you will see ‘Menu’ Icon. Click the ‘Menu’ Icon to log in. 2) Then, you will see ‘DVR Log-In’ message shown as right. 3) You may log in as a ADMIN, MANAGER, or USER1 ~ USER8. 4) Input your password (Max (Max. 8 digits are available for password) 5) To exit, click ‘EXIT’ button.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP. 4 Operation 4-3.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP. 4 Operation 4-4. Live View Setup 1) Full / Multiple View CHAP. 4 사용방법 Move a cursor to ‘split icon’ on the lower left corner of display and click it to view 4 channel division. To enlarge each channel, click 1,2,3,4 Icon. Then, you will see a channel in full screen mode. Full Screen Full Screen 2) SEQ Click ‘SEQ’ SEQ icon. icon It automatically displays full screen images in sequence sequence. You can setup SEQ time interval on setup menu.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP. 4 Operation 4-5. Record g made by y a user in Schedule Mode. It records as a setting - Schedule Record Go to MAIN MENU-SCHEDULE SETUP and setup schedule as you want. It records as a setting. - Record Icon in Red indicates Schedule Record, Motion record, and alarm record.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP. 4 Operation 4-7. SEARCH There are three search methods controlled by a mouse wheel button, left and right button of a mouse. When you click [SEARCH] icon, then you see a window shown as below. Select a target data by using a mouse. In PERCENT SEARCH Mode, you can select a certain data by clicking on the bar. To move to the previous mode, click ‘ESC’. 1. PERCENT SEARCH Search by percentage of total recorded data.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP. 4 Operation 4-8. PAN/TILT/ZOOM Camera Operation Click [PT [PTZ] ] icon to control a PT PTZ camera. PAN/TI PAN/TILT T is controlled by Left eft & Right buttons and Zoom In & Out is controlled by a wheel of a mouse. You can control a PTZ camera in 8 different directions as shown below. 4-9. Data Backup Click [MENU] icon first first. 1. Insert empty CD-R media into CD writer and select the start time & date from which you want to back up.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP. 5 Set up CHAP. 5 Set up 5-1. General Operation Click [MENU] icon and input user password to log in.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP. 5 Set up 5-2. DISPLAY SETUP This is setup menu for display on the screen. If you click ‘DISPLAY SET UP’, then you change setting values for display as shown below. DISPLAY SETUP VGA SETUP SCREEN DISPLAY OSD SETUP ESC 1) VGA SETUP VGA SETUP RESOLUTION 800 X 600 / 75Hz DEFAULT ESC VGA SETUP : Connection to a VGA monitor (CRT/TFT LCD), if optional VGA board is fixed on the main board. You can set ‘RESOLUTION’ for VGA as shown below.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP. 5 Set up 5-3 5 3. RECORD This is the most important configuration of the DVR. When you select ‘RECORD SETUP’ in the main menu, you can see the window as shown on the left. RECORD RECORD SETUP SCHEDULE SETUP 1) RECORD SETUP ESC You can change setup value by using a mouse. RECORD SETUP CHANNEL RESOLUTION QUALITY FRAME RATE (1)CHANNEL : CHANNEL select (2) QUALITY : Set recording picture quality.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP. 5 Set up 2)) SCHEDULE SETUP Unless you selected other recording mode, DVR system records in Schedule Recording mode. In Schedule Recording mode, you set type of recording by 1 hour time interval. Default frame rate for continuous recording speed is 30 FPS.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP. 5 Set up 5-4 5 4. CONFIGURATION When you click ‘CONFIGURATION’ on the main menu, you can go to ‘CONFIGURATION’ menu as shown on the right. CONFIGURATION HDD MANAGEMENT CAMERA SETUP MOTION SETUP ALARM SETUP INTERVAL SETUP TIME/DATE SETUP PASSWORD SETUP ESC 1) HDD MANAGEMENT You can see HDD Model name, serial number, number of blocks and size of HDD. You can also clear HDD. (While you are in this HDD MANAGEMENT Mode, DVR does NOT record.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP. 5 Set up 2) TIME/DATE SETUP IIn thi this setup, t you can select l td date/time t /ti off DVR system and display format. You can adjust values by using a mouse wheel or left/right button of a mouse. ※ For the first time installation, date/time setup must be completed first.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP. 5 Set up 4) MOTION SETUP MOTION SETUP CHANNEL SENSITIYITY DURATION DETECT CELL NUM. CH1 5 05 01 DEFAULT ALL-DEFAULT ESC MOTION SETUP : You can change values by mouse wheel and left/right button of a mouse. - SENSITIYITY : Adjusting sensitivity of a movement. You can adjust level 1 ~ level 5.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP. 5 Set up 5) INTERVAL SETUP See the switching time interval for S SEQ Q or PIP function. (1 sec. ~99 sec. ） SEQUENCE SCREEN :Set the sequencing switch time interval in live full screen. INTERVAL SETUP SEQUENCE SCREEN 01 SEC PIP SCREEN 01 SEC EVENT UPDATE 600 SEC PIP SCREEN : Set the sequencing switch time interval of PIP window. DEFAULT ESC EVENT UPDATE : Set the minimum time interval of event to be listed on EVENT LIST.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP. 5 Set up 5-5. EXTERNAL DEVICE EXTERNAL DEVICE Set parameters of external devices connected to DVR like Ethernet, PTZ camera, Spot monitor etc. If you click ETERNAL DEVICE on the main menu, then you will see the window shown on the right. TCP/IP SETUP PAN/TILT SETUP SPOT SETUP ESC 1) TCP/IP SETUP TCP/IP SETUP TCP/IP function enables you to see live pictures and recorded pictures via internet.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP. 5 Set up 5-6. BACK-UP 1) CDR SETUP You can back up the recorded data to CD using CD writer installed in DVR. Refer to [START] and [END] of data on HDD and set copy from time, [START], and size of data copied, [SIZE], and move to BURN and click it to start copy.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP. 6 Network Setup CHAP. 6 Network Setup 6-1. DVR Network Configuration Please call your provider to identify what type of service they are providing you. You will need to know following : Upload speed – For your own knowledge for expected frame rates. Download speed – For your own knowledge for expected frame rates. Addressing – For determining what scenario you should follow. Router ON Site or Just a Modem – For determining what scenario you should follow.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP. 6 Network setup TCP/IP function enables you to see live pictures, recorded pictures and also allows you to backup, and control a PTZ camera via internet. How to set Network depending on ISP 1. Static IP User input IP address in IP CONFIG SETUP which is assigned from ISP company. 1)) Verify if IP address is OK or not with PC before connecting DVR. 2) Connect LAN cable to DVR after confirmation. 3) DVR : MENU→EXTERNAL DEVICE→TCP/IP.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP. 6 Network Setup 2. Dynamic IP If you set ‘AUTOMATIC’ for DHCP Type on TCP /IP setup menu, IP information is automatically assigned from ISP’s DHCP. 1) Verify if IP address is OK or not with PC before connecting DVR. 2) Connect LAN cable to DVR after confirmation. 3) Turn off and on Modem ( Router ) which is provided by ISP company. -> This is to reset client of MAC from ISP company. User have to wait for 30 seconds after turning on.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP. 6 Network Setup 3. Dynamic IP of PPPoE (DSL) DVR doesn’t doesn t support DSL(PPPoE), user have to set NETWORK with IP SHARE if user need to access DVR remotely. At this time, user have to port forward on DVR. Please contact IP SHARE Manufacturer if You need to know how to forward port.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP. 6 Network Setup 6-2. Remote Viewer program MAIN INTERFACE 1 6 7 8 5 2 3 4 ①- Power button : Press the Power switch to exit the program. Please disconnect the live feed before powering off the software ②- Connect button : Press the Connect button to view the live images from the DVR.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP. 6 Network Setup IP/PORT Setting Screen IP List MANUAL DDNS Input IP address and PORT manually Receive IP address and PORT from DDNS Server. For further information of DDNS, please contact your vendor. Name Address PORT ID Password Name of IP address on the list. Input IP address which is set on DVR Input p PORT which is set on DVR Input ID which is set on DVR. (Please input ‘admin’.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP. 6 Network Setup PTZ/SAVE Setting Screen Circular Monitoring Interval : This indicates the speed of the channels sequence when the SEQUENCE button is used from the main interface. Scan Rate : Set speed of playback. Set Path to Save Downloaded image : Determines the location and folder on your PC where the d downloaded l d d video id clips li are stored.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP. 6 Network Setup PLAYBACK INTERFACE through Remote Viewer 2 1 3 7 8 9 10 4 6 5 Function of each button in Search window. ① Exit : Exit to live window. ② Full screen : Select a certain camera to view in full screen. ③ Quad : To view quad mode (4 channels at the same time) ④ Time : The recording time & date information of the pictures which is being played. ⑤ Channel selection : Select each camera.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP. 6 Network Setup : Play fast backward : Move to the start of recording : Play backward(1X) : Move to the previous hour : Play forward(1X) : Move to the afterward hour : Play fast forward : Move to the end of recording : Stop playback ⑨ Command button. a) SAVE : After pressing the Stop button, click SAVE button to save the currently viewed image in jpg format.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP. 6 Network Setup 6-3. Back-up CD Player 1 9 2 3 10 b e c 4 g d a f 8 5 7 6 DVR units are with a built-in CD-RW, and user can copy images to CD. Using back-up CD player, user can see images on back-up CD, and function of each button in Back-up CD player is as below. ① Time : Current time. ② Status Window : Start & End of time & date, Status of operating button. When user play forward/backward, recorded time will appear.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP. 6 Network Setup ⑩ When you open the file, audio menu OSD will come up automatically. - on : check to output recorded sound, then choose the audio channel 1,2,3 or 4 - skip : skip images forward. * During playback, you can control only. * During playback, only one channel is displayed and can not be changed to multi or full screen.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP. 7 Web-Viewer Setup 7-1. Registering DVR for DDNS (DDNS Web-server) 1) Please access www.j2kip.com and click Register Member ID. 2) Please click DVR Add to register DVR. 42 CHAP.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP. 7 Web Viewer Setup 3) Please click confirm after inputting DVR information (DVR Name and MAC Address only). Then, Click “confirm” confirm button. 4) Now, DVR is listed on DDNS web server without IP and Port number.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP. 7 Web Viewer Setup 7-2. DDNS set up in DVR * Th The ffollowing ll i setting tti iis a sample l ffor a cable bl modem d connected t d tto DVR di directly. tl 1) Go to Menu 2) Go to IP SETUP menu, if you set DHCP AUTOMATIC then, it detects IP address automatically.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP. 7 Web Viewer Setup 4) Set DDNS ON/OFF ‘ON’. IP address which is assigned from DHCP server is automatically input on DNS SERVER. DDNS SETUP DDNS ENABLE DNS SERVER INTERVAL ON 192.168.063.001 D-00 H-00 N-20 REGISTER DDNS STATUS IP ADDRESS IP PORT REMAIN TIME LAST REGISTRATION DATE > WED. WED 12 JUL 2006 REGISTER OK 192.168.001.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP. 7 Web Viewer Setup 6) Go to your computer again after you see “SUCCESS TO REGISTER DVR INFO” and then Click ‘refresh’ refresh button. Then, DDNS server automatically catches your DVR’s DVR s IP address and Port number. Note. Before using Web-Viewer, please add www.j2kip.com on Trusted Sites at first installation as follows.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP. 7 Web Viewer Setup 7-3. Web Viewer 1) Please click the following icon to execute Web-Viewer. *If ActiveX control installation is required for the first time access, please click ‘Yes’. Click 2) The following Web-Viewer will pop up. Press ‘connect’ button to see the Live image. 3) You can see the Live image as shown below.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP. 7 Web Viewer Setup 7-4. Web Backup Player 1) To execute Web Backup Player, click web viewer icon on the right. * *If ActiveX control installation is reqired for the first time access, please click ‘Yes’. 2) The following Web-Viewer will pop up. Press ‘open’ button to open the backup image file. 3) Choose one backup data file and click ‘open’ button on window.
4Ch Real time/Triplex/Mux - Stand Alone DVR 4) Y You can see B Backup k i images shown h as b below. l 50 CHAP.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP. 7 Web Viewer Setup 7-5. Web Backup 1) Log on to www.j2kip.com www j2kip com first and then then, click ‘DVR DVR Web Backup’ Backup icon on the left left. 2) To execute BACKUP, input IP Address & Port and click ‘Connect Test’ button.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP. 7 Web Viewer Setup 3) After Connect Test is done, you can see ‘Success Connect Test!’ message. Then, click ‘lock’ b tt button and d click li k ‘S ‘Sett B Backup k Ti Time’’ b button. tt 4) Now you set ‘Start Time’, ‘End Time’, ‘Save File Path’, ‘File Size’ and click ‘Apply’.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP. 7 Web Viewer Setup 5) After finishing time setting, click ‘Start Backup’ to start backup. Then, you can see the backup file on the path that you chose.
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP 8. Specifications CHAP. 8 Specifications • MJPEG Compression C i Al Algorithm ith • Real time live display in all channels • Triplex (Playback/Recording/Ethernet) • Web monitoring and download through network • Easy control by Mouse • USB host for data backup.
4Ch Real time/Triplex/Mux - Stand Alone DVR MEMO : 55
4Ch Real time/Triplex/Mux - Stand Alone DVR MEMO : 56
4Ch Real time/Triplex/Mux - Stand Alone DVR MEMO : 57
4Ch Real time/Triplex/Mux - Stand Alone DVR MEMO : 58
4Ch Real time/Triplex/Mux - Stand Alone DVR 4Ch Real time/Triplex/Mux 59
