Instruction manual

28 8921ADT Instruction Manual

Conﬁguration

Remote Conﬁguration and Monitoring

8921ADT conﬁguration and monitoring can be performed using a web

browser GUI interface when the 8900NET Network Interface module is

present in the audio frame (Gecko 8900TFN-A frame). This section

describes the GUI access to the module conﬁguration functions.

For remote access, make sure the jumper block on the module is set for both

Local and Remote access (Figure 6 on page 25).

Refer to the 8900NET Network Interface Module Instruction Manual for infor-

mation on the 8900NET Network Interface module and setting up and

operating the Gecko 8900 frame network.

Note For optimal performance and access to the latest features, it is recommended

that the 8900NET module be updated to the latest software release. Check the

Grass Valley web site for the current 8900NET software.

Refer to the Frame Status page shown in Figure 7 on page 29. The 8900

audio modules can be addressed by clicking either on a speciﬁc module

icon in the frame status display or on a module name or slot number in the

link list on the left.

Note The physical appearance of the menu displays on the web pages shown in

this manual represent the use of a particular platform, browser and version

of 8900NET module software. They are provided for reference only. Displays

will differ depending on the type of platform and browser you are using and

the version of the 8900NET software installed in your system.

Use the Refresh button to update the display (available with 8900NET soft-

ware version 3.0 and later).

The

Online Manual Link button can be set up to link to the documentation in

pdf format. Link conﬁguration is done on the Frame Conﬁguration page.

For information on status and fault monitoring and reporting shown on the

Status page, refer to Status Monitoring on page 51.