Digital Multiplex Recorder User Manual Please read this instructions thoroughly before operation and retain it for future reference. 777 V 1.
DMR WARNING All the safety and operating instructions should be read before operation. The improper operation may cause permanent damage. Please use the provided adaptor (Other adaptor is not suitable for this machine). Please lift and place this equipment gently. Do not expose this equipment to open sunlight. Do not use this equipment near water or in contact with water. Do not spill liquid of any kind on the equipment. Please power down the unit before unplugging.
TABLE OF CONTENTS DMR What do you get ? FEATURES ---------------------------------------------------------------------------------------- 3 PACKAGE INCLUDING ------------------------------------------------------------------------ 3 Before Operation INSTALLATION GUIDE ------------------------------------------------------------------------ 4 FRONT PANEL ----------------------------------------------------------------------------------- 5 BACK PANEL -------------------------------------------------
What do you get ? FEATURES DMR Features • Wavelet Compression Format replaces Time-Lapse VCR + Multiplexer • 4 Audio inputs / 2 Audio outputs • On Screen Display and RTC (Real time clock) Function • Support from 4 channel to 7/9/10/13/16 channels video inputs • Picture-In-Picture (PIP) is available in live and DMR playback modes • Motion detection function and 4 Level video quality adjustable on each channel • Alarm Input & Output Function • Video loss detected on each channel can record 160 events • Powe
INSTALLATION GUIDE Before Operation 1. Connect cameras and monitor with the DMR. 2. Shown below is one example for connecting the DMR to your existing Observation System. 3. Install HDDs (The compatible HDD Brands are listed in the following table.) Please refer to page.20 Appendix #1 for installation instructions. The HDDs must be installed before turning on the DMR.
DMR FRONT PANEL 1 5 3 2 4 7 6 11 9 8 10 13 12 15 14 Up 16 Left MENU SELECT ENTER ZOOM SLOW HDD HDD ALARM TIMER PLAY REC Full 1. REMOVABLE HDD CARTRIDGE Please refer to page.20 Appendix #1. 2. MENU Press MENU to enter main menu. 3. ENTER Press ENTER for confirmation. 4. ZOOM Press ZOOM to enlarge the picture display. 5. Press PIP button for Picture in Picture screen. 6. SLOW To slow down speed of play mode. 7.
9. 7, 9, 10, 13 channels display mode 10. 16 channels display mode 11. LED LIGHT The LED Light is ON under following condition. HDD : HDD is activated HDD Full : HDD is full ALARM : If you want to turn off the ALARM LED light, please refer to page.14 and set the Camera / ALARM item as OFF. (all of the cameras should be set as OFF.) TIMER : When Timer is set as Enabled PLAY : On Play mode REC : On Recording mode 12. CAMERA (1-16) Press the Camera Select (1-16) to select specified camera. 13.
DMR BACK PANEL MONITOR LOOP AUDIO IN AUDIO OUT INPUT CALL POWER RISK OF ELECTRIC SHOCK DO NOT OPEN EXTERNAL I/O WARNING : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 1. P0WER Please use the provided adaptor to connect power cord (Other adaptor is not suitable for this machine). 2. EXTERNAL I/O Controlled remotely by an external device or control system.
Basic Operation START THIS UNIT Before using the DMR, please have the HDDs installed ready. (refer to Appendix #1 for installation or removal of HDDs). 1. Connect the AC Power Cord with Power Adapter and plug into an electrical outlet. The Red LED indicator light will be ON and the DMR is in Standby mode. 2. Press the Power button. The POWER LED will turn from red to orange, and other red LED indicators will turn ON.
PLAY Press “ PLAY ” button, the DMR will show the last recording. 1. FAST FORWARD (F.F. ) & FAST REWIND (F.R.) You can increase the speeds of Fast Forward and Rewind on the DMR. In the Play mode, press ” ►► ” once to get 2X speed forward and press twice to get 4X speed,… and the maximum speed can reach 32X. Press ”◄◄ ” once to get 1X speed rewind and press twice to get 2X speed, … and the maximum speed can reach 32X. 2. SLOW FORWARD (S.F.) & SLOW REWIND (S.R.
Detailed Menu Setup ACCESS MENU The Menu allows you to configure your DMR settings. Please follow below steps to access the Menu : Password: 0000 Press the Menu button. The password screen will appear: NOTE : The default Password is 0000. Simply press the Enter button to access the Menu. To key-in the Password, press the “Right” and “Left” buttons to move between numbers, and use the “Up” and “Down” buttons to input the number. Press the ENTER button once the correct Password is entered.
DMR MENU OPTIONS SYSTEM 1. AUDIO INPUT To choose one of 4 channels to record. (only can select 1 during operation for recording) 2. INT AUDIBLE ALARM To set the INTERNAL AUDIBLE ALARM. It will be trigged by event occurrence when the setting is ON. 3. EXT AUDIBLE ALARM (MENU) SEARCH TIMER RECORD CAMERA ►SYSTEM EVENT To set the EXTERNAL AUDIBLE ALARM. It will be trigged by event occurrence when the setting is ON. 4. MOTION AUDIBLE ALARM To set the MOTION AUDIBLE ALARM.
11. NEW PASSWORD : XXXX (Default password : 0000) To set the new password. 12. CLEAR HDD Delete all the contents of your HDD. When you choose “YES” on this option, you will be prompted with the question shown : Press “►” to clear HDD or press ”◄” to confirm not to clear HDD. 13. SYSTEM RESET ALL DATA IN HDD WILL BE CLEARED ARE YOU SURE? Reset all system settings to book to factory default settings. (◄ : NO ► : YES ) 14.
TIMER 1. DAY Select the day, or days of the week (Mon–Fri / Sat-Sun / Daily) that you wish to schedule the DMR to automatically record. NOTE : 1.Special Date could be changed by “Enter”, “Up” and “Down” buttons. 2. If you have selected the specific date and recording timer set from that specific day to a new day, then the Recording Timer Schedule will be set as whole week. For specific date of Recording Timer Schedule, it is not recommended to set End Time over 23:59.
RECORD 1. HDD OVERWRITE Select “YES” to overwrite previous recording video in HDD. NOTE : When the HDD is full under O/W Recording mode, previous recorded files may be overwritten without further warning notices. (MENU) SEARCH TIMER ► RECORD CAMERA SYSTEM EVENT 2. RECORD IPS Select the images per second of recording. The options are as following : NTSC－25A、15、8、4、2、1 PAL－18A、12、6、3、2、1 NOTE : “A” means “Record with Audio ”. 3.
MOTION DETECTION DMR MOTION DETECTION SETUP 1. Press “ MENU “ to enter the menu set up, then “ Down ” to CAMERA setup. 2. Press “ENTER” twice to enter the Motion Detection Setup. 3. Each screen displays the current camera picture overlaid with the motion targets (as Figure 1). You can push the button “ Left ” or “ Right ”, ” Up ” or “ Down ” to adjust motion detection in ON or OFF. 4. The targets on each motion setup can be turned to ON or OFF individually.
Figure 1-1 MOTION DETECTION SETUP — 1~15 Figure 1 MOTION DETECTION SETUP 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1 15 2 3 4 5 6 7 -- -- -- -- -- -- -- -- -- -- -- -- -- 2 3 4 5 6 7 8 9 10 11 12 -- -- -- -- -- -- -- 13 14 15 1 2 3 4 5 6 -- -- -- -- -- -- -- 7 11 12 13 14 15 -- -- -- -- -- -- -- -- 8 9 10 11 12 13 14 15 032 032 -- 10 Figure 1-3 MOTION DETECTION SETUP-- ALL Figure 1-2 MOTION DETECTION SETUP-- LINE 1 9 0
OPERATION OPTIONS SELECT Advanced Operation This device allows user to get the ideal view size. ÆPress , , button to make different view size. ÆPress “ Select ” then “ Left ” or “ Right ” button to locate the desired position. ÆPress “ Camera Select (1-16) “ to select the appointed camera. ÆPress “ Menu “ to exit. PICTURE IN PICTURE (PIP) Press PIP button to enter PIP display screen. The PIP format displays a full screen “background” picture with a 1 / 16 size screen “insert”.
DMR KEY LOCK For further security, you can “Lock” all buttons on your DMR. Locking disables the buttons and prevents other people from using the system. Press ENTER and MENU at the same time to enable Key Lock. Press ENTER and MENU at the same time and key in password (Default : 0000), then press “ENTER“ to disable Key Lock. RS232 REMOTE PROTOCOL You can use the PC keyboard to simulate DMR keypad.
DMR TROUBLE SHOOTING When malfunction occurs with DMR, it may be not serious and can be corrected easily. The table below describes some typical problems and their solutions. Please check them before calling your DMR dealer. PROBLEM HDD Not Found z SOLUTION Please Insert HDD z Please use the Key to lock the HDD Cartridge And press any key No power z Check power cord connections. z Confirm that there is power at the outlet. z z Check if it is under Key Lock mode.
APPENDIX #1 – INSTALLING the HDD Please follow the next steps carefully in order to ensure correct installation. The compartment located on the front panel of the DMR is the removable Cartridge Casing in which you insert the HDD. The various parts of the Cartridge Casing are labeled for your reference. 1.Remove the Cartridge Casing from the DMR Keyhole Cartridge Casing LED indicator lights Handle 2.
4. Secure the HDD in the Casing (optional) Use the supplied screws and tighten them, positioning the HDD into place. 5. Slide the top Cover over the Cartridge Casing Slide the Cover forward over the Cartridge Case. Ensure it is secured in place over the release latch. 6.Reinsert the Cartridge Casing into the DMR Fully insert the Cartridge Case into the DMR. 7. Lock the Cabinet Lock the cabinet by turning the key clockwise.
APPENDIX #2 – PIN CONFIGURATIONS 25 pin com port DMR 9 pin com port DMR 22
PIN 1. GND GROUND PIN 2. — PIN 9. ALARM INPUT To connect wire from ALARM INPUT ( PIN 2 -- 9 ) to GND ( PIN 1 ) connector, DMR will start recording and buzzer will be on. When Menu/ Camera/ Alarm is set up to “Low” : When alarm input signal is “ Low ”, the unit starts to record and buzzer. When Menu/ Camera/ Alarm is set up to “High” : When alarm input signal is “ High ”, the unit starts to record and buzzer. PIN 10. PIN OFF PIN 11.
APPENDIX #3 – RACK MOUNT Screws and brackets for rack mounting applications can be purchased as an optional accessory.
APPENDIX #4 – RECORDING SPEED The Record Time is different based on Record Speed and Record Quality. Please refer to following table. NTSC SYSTEM PAL SYSTEM Note: Above data is from actual test data obtained from recording normal TV program.
