Product manual

SCSI Description
Maxtor Atlas 10K IV 5-119
0x04
Hdwe Error
0x40 0x8C LBA mismatch error
0x40 0x8D ETM test failure, drive failed to spin
0x40 0x8E Could not achieve target RPM
0x40 0xA0 Test did not complete
0x40 0xA1 Test completed successfully, but failed.
0x40 0xA2 Invalid parameter was received.
0x40 0xA3 Invalid data in servo record. Prevented algorithm from
completing.
0x40 0xA4 Servo record did not complete
0x40 0xA5 Read seek failed
0x40 0xA6 Write seek failed
0x40 0xA7 Raw seek failed
0x40 0xA8 Servo Diagnostic Test running.
0x40 0xA9 Invalid 97/98 super cmd seq. Must send 97 before 98
0x40 0xAA Super Command 97 already running
0x40 0xAB Complex magnitude is zero
0x40 0xAC Could not complete the low-level BCV write function
0x40 0xAD Got a divide by zero error in complex divide.
0x44 0x00 Logical assertion (firmware consistency check)
0x44 0x84 Insufficient buffer memory for operation
0x90 0x01 Serial Port Packet Receive Error
Sense
Key
Sense
Code
Sense
Qualifier
Meaning