Product manual

Installation
Maxtor Atlas 10K IV 3-23
3.9 DRIVE MOUNTING AND INSTALLATION
Drive mounting orientation, clearance, and ventilation requirements are described
in the following subsections.
3.9.1 Orientation
The mounting holes on the Maxtor Atlas 10K IV hard disk drive allow the drive to
be mounted in any orientation. Figure 3-7 shows the location of the three mounting
holes on each side of the drive. The drives also can be mounted using the four
mounting hole locations on the PCB side.
All dimensions are in millimeters. For mounting, #6-32 UNC screws are
recommended.
Figure 3-7 Mounting Dimensions Maxtor Atlas 10K IV Drives