Product manual

Installation
4-2 DiamondMax Plus8 20/30/40GB AT
4.2 UNPACKING INSTRUCTIONS
1. Open the shipping container and remove the packing assembly
that contains the drive.
2. Remove the drive from the packing assembly.
3. When you are ready to install the drive, remove it from the ESD
bag.
CAUTION: The maximum limits for physical shock can be exceeded if the
drive is not handled properly. Special care should be
taken not to bump or drop the drive. It is highly recommended
that Maxtor DiamondMax Plus8 drives are not stacked or placed
on any hard surface after they are unpacked. Such handling could
cause media damage.
CAUTION: During shipment and handling, the antistatic electrostatic dis-
charge (ESD) bag prevents electronic component
damage due to electrostatic discharge. To avoid accidental dam-
age to the drive, do not use a sharp instrument to open the ESD
bag and do not touch PCB components. Save the packing mate-
rials for possible future use.