User manual

9
Ernitec EDNS V1000 series – user manual
www.ernitec.com
V 2.2.082012
2.3 Rear Panel Connections
There are various connectors on the rear panel for the DVR
installations. For different models, the connectors vary
accordingly. Refer to Setup Guide for actual provided
connectors. The following shows the detailed description of each
connector.
Main Monitor (BNC/ VGA/ Digital Output)
The DVR supports three different types of main
monitor: BNC, VGA, or Digital Output. The main
monitor displays live image and playback recorded
video in full-screen or split-window format. Digital
Output connector is optional.
Call Monitor
The BNC call monitor connector allows users to
connect the DVR with an optional call monitor. The call
monitor is used to display full screen video of all
installed cameras in sequence.
Video In
A group of BNC connectors is offered for video input from installed cameras.
The number of connectors equals the number of channels.
Note: The DVR will detect video source of CH1 and automatically
adjust the system to NTSC or PAL system.