User's Manual

PRODUCT DESCRIPTION
2 – 1
SECTION 2
ProductProduct
ProductProduct
Product
DescriptionDescription
DescriptionDescription
Description
Maxtor hard disk drives are 3.5-inch diameter random access storage devices which incorporate an on-board Ultra
ATA/100 controller. High capacity is achieved by a balanced combination of high areal recording density and the
latest data encoding and servo techniques.
Maxtor's latest advancements in electronic packaging and integration methods have lowered the drive's power
consumption and increased its reliability. Advanced giant magneto-resistive read/write heads and a state-of-the-art
head/disk assembly - using an integrated motor/spindle design - allow up to four disks in a 3.5-inch package.
Key FeaturesKey Features
Key FeaturesKey Features
Key Features
ANSI ATA-5 compliant PIO Mode 5 interface (Enhanced IDE)
Supports Ultra DMA Mode 5 for up to 100 MBytes/sec data transfers
2 MB buffer with multi-adaptive cache manager
5400 RPM spin speed
15 ms average seek time
Zone density and I.D.-less recording
Outstanding shock resistance at 300 Gs
High durability with 50K contact start/stop cycles
Advanced multi-burst on-the-fly Error Correction Code (ECC)
Extended data integrity with ECC protected data and fault tolerant servo synchronization fields
Supports EPA Energy Star Standards (Green PC Friendly) with ATA powering savings commands
Auto park and lock actuator mechanism
Low power consumption
S.M.A.R.T. Capability
Note: Maxtor defines one megabyte as 10E6 or one million bytes and one gigabyte as 10E9 or one billion bytes.