User guide

28
Figure 6 Network Adapters on Server Appliance
IP Settings
Each computer on the network must have a unique
IP address to send and receive data. You can use the
IP Address Configuration screen to have your
MaxAttach automatically obtain the IP address
configuration from the Dynamic Host Configuration
Protocol (DHCP) server. You can also configure the
address(es) manually.
In addition, you can use the IP Address
Configuration screen to specify one or more
gateway addresses. (A gateway address is the address
of a local IP router on the same network as the
MaxAttach that is used to forward traffic to
destinations beyond the local network.) The value in
each field must be a number from 0 through 255.
Note: Changing the IP address may cause the client
to lose its connection with the MaxAttach.
To reconnect, the user must either use the