User guide

MaxAttach NAS 4100 User Guide 33
3. From the Object Selection table, select the
network connection to modify.
4. On the Tasks list, select DNS.
5. Next to the Configuration option (see Figure 8
on page 32), select the Configure manually
radio button.
6. Enter the appropriate server name in the box
next to the Add button, then click Add.
7. To add another DNS server, repeat step 5.
8. When you are finished adding DNS servers, click
OK.
Note: If the IP address is set to be obtained from
DHCP, and you set DNS manually, the
system will accept the manual input, and the
properties on the MaxAttach will
automatically be set to Configure
manually. However the Current
Configuration column of the Object
Selection table on the Network Adapters
page will still show DHCP as the source of
the IP address. You can go back into the
DNS settings properties page to confirm
that the manual configuration has been saved.
WINS Settings
WINS clients attempt to register their names with a
WINS server when they start or join the network.
Thereafter, WINS clients query the WINS server as
needed to resolve remote names.