User guide

64
Enable Services
Microsoft recommends that you enable only the
necessary network components. Limiting the
number of enabled network components will
enhance the performance of other network services.
Additionally, if a problem is encountered with a
network or dial-up connection, the system will
attempt to establish connectivity by using every
network protocol that is installed and enabled. By
only enabling the services that your system can use,
the MaxAttach can conserve resources and perform
better.
To enable a network service
1. On the primary menu bar, click Services.
The Manage Services page (Figure 19) displays.
Figure 19 Manage Services
2. On the Object Selection table, select the
service to enable.
3. On the Tasks list (adjacent to the Object
Selection table), click Enable.