User guide
86
To configure FTP anonymous access
1. On the primary menu bar, select Services.
2. On the secondary menu bar, select FTP.
—OR—
Select the FTP Service option from the Object
Selection table, then click Properties.
The FTP Service Properties dialog box (Figure
29 on page 85) opens.
3. Select the Anonymous Access tab (Figure 31).
Figure 30 Anonymous Access tab of FTP Service Properties
4. Choose settings according to the following
considerations then click OK:
When anonymous FTP connection to the
server is not allowed, each user must provide
a valid Windows user name and password. To
configure the FTP server service for this
setting, make sure the Enable anonymous
connection check box is cleared.
When both anonymous and Windows users
can connect to the FTP server, users can use
either: 1) an anonymous connection, or 2) a
Windows user name and password. To
configure the FTP server service for this
setting, make sure only the Enable
anonymous connection check box is
selected.