User`s guide

Maxtor OneTouch IV 91
How you disconnect your OneTouch 4 from your system depends on your Operating
System platform:
Windows:
1 Double-click the Safely Remove Hardware icon in the System Tray.
2 Select the OneTouch 4 from the list of devices and click Stop in both windows.
3 Disconnect your OneTouch 4 from your computer.
Macintosh:
1 Click and drag the volume associated with the OneTouch 4 to the Trash to eject the
volume.
2 Disconnect your OneTouch 4 from your computer.
You can also disconnect the OneTouch 4 when your computer is shut down.
Note: Never disconnect the OneTouch 4 drive while data is being transferred between the
computer and the drive. Failure to properly disconnect the OneTouch 4 drive may result in
data corruption or loss.
10. What do I do if my OneTouch 4 software is lost or corrupted?
The OneTouch 4 installation software and utilities are pre-loaded on your drive. These files
will be permanently lost if you delete them or reformat the drive. Seagate recommends that
you copy all installation files to your local system before using the drive.
If the OneTouch 4 installation and utilities files are lost or corrupted, you can download new
copies from the Seagate Website at www.seagate.com. On the website, click the
Download Center link for all available downloads for your OneTouch 4.