User`s guide

You can back up manually, at any time, by pressing the button on

the front of your drive and clicking Back up now.

Your hardware and software installation is now complete. See

“Using Your Drive” on page 38 in chapter 3, for information about

using your drive for common applications and using

Retrospect Express HD.

Windows 98SE and ME

Step 1. Install the Software

Internet Explorer 5.01, or later, must be installed.

1. Turn on your computer

2. Insert the Maxtor Installation CD into your CD-ROM drive. After

a few seconds, the Maxtor Select Language screen will open.

If, for some reason, the Maxtor screen does not appear:

• Click the Windows Start button and then click Run.

• Click Browse and find the drive named Install CD

• Open Install CD, open Launch and click OK.

3. Select your language.

The Main Menu will appear next.

4. Select Install Software.

The Install Software screen will appear.

5. Select Full Installation or Install Drivers.

(Full Installation is recommended.) See “Software Installation

Options” on page 6 of this chapter for more information.

It may take a few seconds for the next screen to appear.