User`s guide

29
2
Once you’ve made your selection, Retrospect Express will
open and the Maxtor OneTouch Setup screen will appear.
5. Click Next.
The Step 1 screen will appear.
6. Select the hard drive where your operating system is installed
and click Next.
The Step 2 screen will appear.
7. Choose All Files, bootable backup copy and click Next.
The Step 3 screen is displayed.
8. Select the Maxtor OneTouch II drive as the location to store an
exact copy of all your computer’s files.
You cannot select the same drive to be both the source and
destination for your files. The source and destination drives
must be different.
9. Click Next.
The “Congratulations... now ready” screen appears.
10. To complete the Maxtor OneTouch setup, click Finish.
11. Go to the Retrospect Express menu and choose Quit
Retrospect Express to exit Retrospect Express.
12. If you are ready to back up your entire computer, push the
button on the front of your drive.
The OneTouch button may not function when Retrospect
Express is already running. To correct the problem, quit
Retrospect Express.
Your complete system backup will start.
Depending on the number of files on your computer,
the backup process may take a long time.
Only the current versions of your files are saved. Backup
copies made with the Maxtor OneTouch feature do not
include earlier versions of files you have deleted since the
last time you pressed the Maxtor OneTouch button.
Any files that are currently open are not saved.
You may customize Retrospect Express to create backup copies of
your files which will include revisions made on a daily basis.
See the Retrospect Express User’s Guide for Macintosh, included
on the install CD.
Your hardware and software installation is now complete. See
“Using Your Drive” on page 38 in chapter 3, for information on
using your drive for common applications and on using Retrospect
to make copies of your important files and restore copied files.
1. Your registration information is collected and maintained according to
the Dantz and Maxtor privacy policies located on their respective
web sites.
If you choose to E-mail the information, make sure you are
connected to the Internet.
If you choose to print the information, you can fax the form to Dantz
Corporation at [phone].