User`s guide

Using Your Drive 46
3
Macintosh OS 9
Setting Up the Maxtor OneTouch Feature
You can set up the Maxtor OneTouch feature to automatically make
a backup copy of your selected files each time you press the
OneTouch button.
Before you begin, make sure the Maxtor Install CD is NOT
in your CD-ROM drive.
To set up the Maxtor OneTouch button feature
1. Push the button on the front of your drive.
If you have not already registered, a window will appear:
‘Would you like to register Retrospect Express now?
If you have already registered, skip to step 4.
2. Choose either Register Now, Register Later or
Already Registered.
If you choose Register Now, go to the next step.
If you chose Register Later or Already Registered,
Retrospect Express will open. Go directly to Step 4 -
Maxtor OneTouch Setup.
3. Enter the required information on the form.
•Click Email to register via email
•Click Print to register via mail
•Click Register Later if you do not want to register at this time.
By registering
1
your new drive, you will have the option of
receiving product updates, special offers, and important
information about other data storage solutions from Maxtor.
4. Retrospect Express will open and the Maxtor OneTouch
Setup screen will appear.
Click Next.
The Step 1 Screen will appear.
1. Your registration information is collected and maintained according to
the Dantz and Maxtor privacy policies located on their respective
web sites.
If you choose to E-mail the information, make sure you are
connected to the Internet.
If you choose to print the information, you can fax the form to Dantz
Corporation at [phone].