User`s guide

Using Your Drive 54
3
9. Click OK.
The Destination Selection window will now appear,
asking you to choose a ‘Destination for restore.’
Make sure Restore Entire Disk is selected. and select
the drive that you want to restore your system to (your
Macintosh hard drive where the system was originally
installed).
10. Click OK.
A window will appear asking you if you really want to
restore to the drive you selected, replacing it’s
entire contents.
11. Click Replace.
Retrospect will scan your system (This may take a
few minutes).
The Restore from Backup window will appear, to
confirm the source (your Maxtor OneTouch II drive) and
the destination (your Macintosh hard drive) for
the restore.
12. Click Restore.
A window will appear asking you: ‘Really Execute?’
13. Click OK.
(If the ‘Really Execute?’ window appears again, click
OK.)
Retrospect will begin to restore your system.
This process may take several minutes.
When Retrospect Express finishes, you should see the
message: ‘Execution completed successfully.’
You can view the Log to make sure that all of your files
were restored by going to the Window menu and
selecting Log.
14. Quit Retrospect, by going to the File menu and
selecting Quit.
15. Restart your Macintosh.
If the system restore was successful, you should find all of the files
that you originally backed up.