instruction MANUAL DVR SC324

(ii) START - Set the time to start the recording.
(iii) END - Set the time to end the recording.
(iv) IPS (IMAGES PER SECOND)
Allows you to set the Images Per Second for
recording. Available IPS settings are: 1, 2, 4, 8, 15,
30. 1 IPS is the slowest speed; it will allow for the
longest recording durations as it records less
information. Please refer to Appendix #7 for the
different recording times.
(TIMER)
DAY START END IPS QLT MODE
DAILY 01:00 22:00 30 BEST Q-FR
OFF 00:00 00:00 30 BEST Q-FI
OFF 00:00 00:00 30 BEST Q-FI
OFF 00:00 00:00 30 BEST Q-FR
OFF 00:00 00:00 30 BEST Q-FR
OFF 00:00 00:00 30 BEST Q-FR
OFF 00:00 00:00 30 BEST MUX
OFF 00:00 00:00 30 BEST Q-FI
TIMER ENABLE : YES
2. CAMERA
This submenu allows you to set up parameters for each
camera. You can set up the title, type of alarm sensor, the
camera you want to record from, and control of picture
Brightness, Contrast, Color and Hue for each camera.
(i) TITLE - Assign a title to each camera (Max: 8 characters).
Initially each title is the camera’s number.
(Example: Camera 1)
(ii) ALARM - This sets the polarity trigger for the corresponding
external alarm input.
Low: N/O (Normally Open type circuit)
High: N/C (Normally Closed type circuit)
Select LOW/OFF/HIGH for alarm polarity. The default value
is LOW.
(MENU)
TIMER
CAMERA
RECORD
ALARM
DWELL
PIP
MOTION
DISPLAY
REMOTE
USER
SYSTEM
EVENT
-8-
(v) QUALITY - Select the quality of recording image: BEST, HIGH, NORMAL and
BASIC.
(vi) MODE - There are three recording mode settings : QUAD-FRAME, QUAD-FIELD,
and MULTIPLEX. Please refer to Page 10 for an explanation on these
record settings
(vii)TIMER ENABLE
When the TIMER ENABLE is set to “YES”,
(menu screen above), and you press
the “menu” button, you will see a timer
chart, located to the right. This chart shows
you the start and stop times for the various
days of the week.
Note: If the user stops the Timer Recording
during the timer period, you must restart the
scheduled recording by pressing the “REC +
ENTER” keys together.