User's Manual

Starting the configuration
1. Power-on the Disk Array. At the end of the power-on self test
program, the LCD displays the current system status.
2. Press the front panel " Enter " key to access the built-in
configuration program.
3. When the screen displays the password prompt and asks you to
" Enter Password "
Enter Password
0
press " Enter " 4 times to input the default password
( default password is " 0000 " )
4. Re-Configuration RAID
Select " No " to just set up " SCSI ID# ", "Terminator", and
"Password"
Select " Yes " to set up " RAID Level " , " Hot spare disk " , " SCSI
ID# " , " Terminator " , and " Password "
3-4
Configuration