User Manual

2-66
Getting Started
PPoowweerr SSoouurrccee
Choosing a Working Voltage
The system can run either on AC 115V (+/10%) or AC 230V(+/10%),
Slide the AC voltage select switch on the power supply to the
correct position which corresponds with the wall outlet supply
voltage.
Wrong AC Voltage input will harm the power supply and cause
serious damage to the Disk Array.
Figure : Power Source
This Disk Array is supplied with an AC power cord equipped with a
3-wwire grounding type plug. This is a safety feature and it is
important to only use a 3-wwire grounded mains power cord.
! This Disk Array must be grounded
Warning !