User's Manual

Host PortTerminal Port
Power Source
Choosing a Working Voltage
The system can run either on AC 115V (+/10%) or AC 230V
(+/10%), Slide the AC voltage select switch on the power supply
to the correct position which corresponds with the wall outlet
supply voltage.
Warning !
Wrong AC Voltage input will harm the power supply and
cause serious damage to the Disk Array.
Figure : Power Source
This Disk Array is supplied with an AC power cord equipped with
a 3-wire grounding type plug. This is a safety feature and it is
important to only use a 3-wire grounded mains power cord.
! This Disk Array must be grounded
2-6
Getting Started