User manual

18
Maxtronic Orion 410SR User Guide
System Setup
113 Netmask
After the system IP address is set, the administrator also needs to set a sub-network mask
IP address.
Setting the sub-network mask IP address:
114 Gateway
Use the gateway address provided by the network service provider to configure the gate-
way.:
1. Use the up or down button under the 11
Channel 0 submenu to enter the ‘113CH0 Net-
mask’ and press ENT to confirm.
2. Press ENT again to enter the ‘Set CH0 Netmask’
screen. The present netmask IP address will be
displayed.
3. To set a netmask IP address, press ENT again.
4. A flashing gray square appears. Use the up and
down buttons to adjust the value of each digit.
Before entering the next digit, press ENT to con-
firm the input.
5. After the netmask IP address setup is complete,
press ENT to confirm.
6. Press ESC to exit the netmask IP setup screen.
The new sub-netmask IP address is displayed.
1. Use the up or down button under the 11
Channel 0 submenu to enter the ‘114Gateway’
and press ENT to confirm.
2. Press ENT again to enter the ‘Set CH0 Getway’
screen. The current gateway address will be dis-
playedn.
3. To set a gateway address, press ENT again.
4. A flashing gray square appears. Use the up and
down buttons to adjust the value of each digit.
Before entering the next digit, press ENT to con-
firm the input.
5. After the gateway address setup is complete, press
ENT to confirm.
6. Press ESC to exit the gateway setup screen.
11Channel 0
113CH0 Netmask
113CH0 Netmask
000.000.000.000
Set CH0 Netmask
000.000.000.000
113CH0 Netmask
255.255.0.0
114CH0 Gateway
11Channel0
Set CH0 Gateway
000.000.000.000
Set CH0 Gateway
000.000.000.000