User manual

Maxtronic Orion 410SR User Guide

Network Setup Settings

Updating Firmware

Updating firmware is a crucial operation if the

Orion 410SR is to remain in optimal working

order. You can acquire the latest version of firm-

ware from your local dealer and load it onto the

system from this screen.

• Locate the firmware file using the ‘Browse’

button (file name should be similar to ‘1.01k-

NAS System.bin’).

• Click ‘OK’. The firmware will be updated

automatically and a prompt to reboot the sys-

tem will appear.

Network Setup Settings

This menu is used to set network-related settings. The opening screen shows the current net-

work status:

The display shows the following:

• NIC: Displays the network interface card

type.

• Attach: Displays connection status of net-

work interface.

• Setup: Displays the type of network inter-

face: manual or automatic (using DHCP/

BOOTP). Set to manual to use a fixed IP

address or automatic for dynamic IP.

• IP address: Displays the network IP

address.

• Subnet mask: Displays the sub network

mask.

• Gateway: Displays gateway address.

• DNS Server: Displays the DNS Server details (optional setting).

• MAC address: Displays the MAC address of the device.

• Current speed: Displays current network speed, normally 10-1,000 Mb/s.

It is strongly recommended that all users are disconnected during the firm-

ware update. Do not shut down or reboot the system during firmware

upgrade otherwise the system will be unable to boot up correctly.