User manual

48
Maxtronic Orion 410SR User Guide
Network Setup Settings
Make sure the IP address shown in the network setup
screen is the same as that of the NAS system. If not,
replace with the correct IP address. Select the ‘Apple Talk’
tab.
Check the ‘Make AppleTalk Active’ option and then open
your Safari web browser.
Replace ‘http’ in the address bar with ‘afp’ and press enter. You will be prompted for your
username and password. You will then be logged into the system via Apple Talk.
A prompt will appear.
Select a mount and press ‘OK’.
The server directory will appear.
Double click the listed share folder you require. An authentication screen will appear.