User manual

50
Maxtronic Orion 410SR User Guide
Network Setup Settings
FTP
The system supports FTP (File Transfer Proto-
col) to share data between FTP clients. The FTP
network screen will appear as below:
• Enable/Disable: Enables or disables the FTP service.
• Auto Rename: If this is selected, the FTP server will never overwrite files. When a file,
whose name already exists is uploaded, the new file will automatically be renamed to
file.1, file.2, etc.
• No Rename: When set, files cannot be renamed.
• Passive IP: When the ‘Manually’ box is checked, the specified IP address is used as the
passive IP address (Passive IP address in PASV/EPSV/SPSV replies) for NAT.
• Passive Port: Specifies the port range for passive connection replies. (Passive ports larger
than 65535 or less than 1024 are not allowed.)
• Bind to Port: Specifies the port to listen to (default: 21).
• Max Idle Time: Maximum user idle time in minutes.
• Max Clients: Maximum number of simultaneous users.
• Max Clients Per IP: Specifies the maximum number of simultaneous clients with the
same IP address.
• Max Sessions Per User: Specifies the maximum number of sessions per user.
• Update: Click to save all settings.
• Cancel: Click to cancel all changes.
If there is a fixed IP available and the system is behind a NAT (net-
work address translation), make sure the IP and port parameters are
set as marked in the red circles above.