Specifications

CHAPTER 7: PLUMBING 25
Autofloat Switch (If Equipped)
• The automatic bilge pump uses a float switch (autofloat switch) to turn on the pump whenever water rises above a
preset level in the bilge.
• The autofloat switch is mounted next to the bilge pump.
• The autofloat switch is wired directly to the battery and will normally function even when the boat is completely
shut down and left unattended.
Test the autofloat switch often
as follows:
1. Push the float switch test button
up to turn on the bilge pump.
• If the pump does not turn on,
check the inline fuse.
• If the fuse is good but the switch
still doesn’t work, it may mean
the switch is bad or possibly the
battery is low.
2. Push test button all the way
down to return the float switch
to auto mode.
Drain Systems (2100SC Only)
Deck Drains
• Water on the deck is drained overboard through the deck drains.
• Keep the deck drains free of debris.
PUSH SWITCH DOWN
LIFT SWITCH UP
BILGE PUMP SHOULD TURN ON BILGE PUMP SHOULD TURN OFF
FLOAT SWITCH
FLOAT SWITCH
TEST BUTTON
TESTING
When the test is completed on the float switch, you MUST push the test button all the way down
to the auto position to return the switch to auto mode!
CAUTION!
!