Specifications

CHAPTER 8: DECK EQUIPMENT 31
1900SR, 2100SR & 2100SC Bimini Top (If Equipped)
Installing the Bimini Top
1. Slide the swivel ends of the main bow (A) over the aft holes (B) in the side windshield frames and secure with
the pins.
2. Hook the hold down straps (C) to the deck loops (D).
3. Unfold the bimini and slide the swivel ends of the forward braces (E) over the forward holes (F) in the side wind-
shield frames and secure with the pins.
4. If the bimini top does not have a smooth, taut look, tighten the hold down straps by pulling on the strap
buckles (G).
• Since the jaw slides (H) were preset during manufacturing they should not need to be adjusted.
• However, if you think the jaw slides need to be adjusted, obtain the measurements from your selling dealer.
A
B
E
F
H
C
G
D
SECURING
PIN
SWIVEL
END