Specifications

Chapter 7: Deck Equipment

Ski-Tow Tower (If Equipped)

Attaching the Ski-Tow Rope

1. Place the ski-tow rope loop (A)

over the ski-tow pylon (B).

2. Put a twist in the ski-tow rope loop

(A) and place over the

ski-tow pylon (B) again.

3. Pull ski-tow rope to tighten.

PERSONAL INJURY and /or PRODUCT or PROPERTY DAMAGE HAZARD!

Failure to follow these guidelines can result in injury or death:

• Read all warning labels on ski-tow tower.

• Before each use, make sure all bolts are in place and tight.

• Only tow water skis, wakeboards, or recreational towables.

• Do NOT exceed the following maximum tow weights:

1800MX model - 400 pounds

1800SR3, 1900SR3, 2000SR3 & 2200SR3 models - 600 pounds

• Do NOT tow parasails, kites, or other boats.

• Do NOT tow more than two persons at one time.

• Do NOT climb on, sit on, stand on, jump off or dive off tower.

• NEVER allow passengers to sit behind tow rope attachment point.

• Use caution with skier in tow as tow rope may snap back into cockpit when released.

• NEVER allow loose tow rope ends to dangle off tower.

• When tower is up, watch for low obstacles such as tree limbs, bridges, or power lines.

WARNING!