Operating instructions

ManualsBrandsMaxus ManualsHousehold AppliancesBenchtop Blast Cabinet MXS3000

2. Safety glasses and a

NIOSH/MSHA

approved respirator

must be worn

during operation

and clean up.

3. During operation,

do not expose the

hands or skin

directly in the line

of the blast nozzle.

4. After assembly,

inspect to make sure all

components seal properly.

5. Do not exceed the maximum

operating pressure of the blasting

equipment (125 PSI).

Disconnect the

cabinet from the

air supply before changing accessories

or attempting to install, service,

relocate or perform any maintenance.

6. Check hoses and air lines for weak

or worn condition before each use.

Make sure all connections are

secure before use.

Do not point the

abrasive blaster

gun at anyone or objects other than

the intended work object.

WARNING

General Safety

Information

CALIFORNIA PROPOSITION 65

You can create dust

when you sweep, blast, cut, sand, drill

or grind materials such as

wood, paint, metal,

concrete, cement, or other

masonry. This dust often

contains chemicals known

to cause cancer, birth

defects, or other reproductive harm.

Wear protective gear.

This product or its

power cord contains chemicals known

to the State of California to cause

cancer and birth defects or other

reproductive harm. Wash hands after

handling.

SILICA ABRASIVE HAZARD

Breathing dust

from abrasives

containing silica can be dangerous.

Exposure can cause SILICOSIS, lung

disease, or other respiratory problems,

Wear NIOSH/MSHA approved respirator

at all times when performing abrasive

blasting and while cleaning up.

Do not misuse this

product. Excessive exposure to

vibration, work in awkward positions,

and repetitive work motions can cause

injury to hands and arms. Stop using

any tool if discomfort, numbness,

tingling or pain occur, and consult a

physician.

1. Read this instruction manual before

connecting this device to the

compressor.

WARNING

DANGER

Benchtop Blast Cabinet

Operating Instructions MXS3000

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.

Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or

property damage! Retain instructions for future reference.

Description

Maxus Benchtop Blast Cabinet is

designed for cleaning and removing

rust, scale, and paint. It is the ideal

method for stripping, polishing and

etching projects.

Safety Guidelines

This manual contains information that

is very important to know and

understand. This information is

provided for SAFETY and to PREVENT

EQUIPMENT PROBLEMS. To help

recognize this information, observe the

following symbols.

Danger indicates

an imminently

hazardous situation which, if not

avoided, will result in death or serious

injury.

Warning indicates

a potentially

hazardous situation which, if not

avoided, could result in death or

serious injury.

Caution indicates a

potentially

hazardous situation which, if not

avoided, may result in minor or

moderate injury.

Notice indicates

important

information, that if not followed, may

cause damage to equipment.

Unpacking

After unpacking, carefully inspect for

any damage that may have occurred

during transit. Check for loose, missing

or damaged parts.

NOTICE

CAUTION

WARNING

DANGER

For parts, product & service information

visit www.maxustools.com

Figure 1

See Warranty on page 8 for important information about commercial use of this product.

REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.

Figure 2 - Do not spray acids or

caustics

Notes

Manuel de Instrucciones

MXS3000

Summary of content (10 pages)

PAGE 1
See Warranty on page 8 for important information about commercial use of this product. Manuel de Instrucciones Notes MXS3000 Operating Instructions MXS3000 Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.
PAGE 2
light switch small tube larger tube air supply fitting Figure 4 – Material hose and metal pick-up tube Figure 3 – Blast cabinet 7. Do not depress the trigger when connecting the air supply hose. Do not work ! near flammable liquids. Blasting media striking metal can cause a spark and create a fire or explosion. DANGER ! WARNING MXS3000 Manuel de Instrucciones Operating Instructions 9. Position the end of the pick up tube in the middle of the cabinet where the blast media will be deepest. 10.
PAGE 3
Manuel de Instrucciones MXS3000 Garantía Limitada – Chorreadoras 1. DURACIÓN: A partir de la fecha de compra por parte del comprador original del modo siguiente: durante 5 (cinco) años, con las excepciones que se detallan a continuación. 2. QUIÉN OTORGA ESTA GARANTÍA (GARANTE): Maxus, 100 Production Drive, Harrison, Ohio, 45030 Teléfono: (800) 543-6400 – www.maxustools.com 3. QUIÉN RECIBE ESTA GARANTÍA (COMPRADOR): El comprador original (sin fines de reventa) del producto de Maxus. 4.
PAGE 4
1. 2. Replace jet and/or nozzle Remove nozzle and jet and clean. Make sure the threads are clean before re-assembling Sputtering - air/abrasive leaks at nozzle/jet area 1. 2. Loose nozzle or jet Damaged o-ring 1. 2. Tighten nozzle or jet Replace o-ring Sputtering - vacuum leak 1. 2. Loose material hose Damaged o-ring 1. 2.
PAGE 5
Manuel de Instrucciones 1. Reemplace el propulsor y/o la boquilla 2. Hay acumulación de abrasivo en el propulsor/boquilla 2. Quite la boquilla y el propulsor y límpielos. Asegúrese de que las roscas estén limpias antes de volver a montar Chisporreo - fuga de aire/abrasivo en la boquilla/propulsor 1. La boquilla o el propulsor están sueltos 1. Apriete la boquilla o el propulsor 2. El anillo en O está dañado 2. Reemplace el anillo en O Chisporreo - fuga de vacío 1.
PAGE 6
Operating Instructions MXS3000 Limited Warranty – Abrasive Blasters 1. DURATION: From the date of purchase by the original purchaser as follows: for five (5) years, with exceptions noted below. 2. WHO GIVES THIS WARRANTY (WARRANTOR): Maxus, 100 Production Drive, Harrison, Ohio, 45030 Telephone: (800) 543-6400 – www.maxustools.com 3. WHO RECEIVES THIS WARRANTY (PURCHASER): The original purchaser (other than for purposes of resale) of the Maxus product. 4.
PAGE 7
Voir la Garantie à la page 12 pour de l’information importante sur l’utilisation commercial de ce produit. Instructions d’Utilisation Manuel de Instrucciones light switch tubo más pequeño tubo más grande air supply fitting Figura 4 – Manguera del material y tubo metálico de entrada Figura 3 – Cabina de chorreado de mesa ! ADVERTENCIA No apunte la pistola abrasiva hacia personas, u objetos que no sean la pieza de trabajo supuesta. 7.
PAGE 8
Ver la Garantía en página 18 para información importante sobre el uso comercial de este producto. Instructions d’Utilisation Manuel de Instrucciones l’interrupteur de la lumière raccord pour la source d’air Figure 3 – Cabine de décapage de table ! AVERTISSEMENT Ne pas diriger le pistolet de décapage vers aucune personne ou objet autre que le projet prévu. 7. Ne pas appuyer sur la gâchette en branchant le tuyau d’air. Ne pas ! travailler près de torchons huileux ou de liquides inflammables.
PAGE 9
Instructions d’Utilisation MXS3000 Garantie Limitée - Souffleurs Abrasifs 1. DURÉE : De la date d’achat de l’acheteur original comme suit : pendant cinq (5) ans avec les exceptions indiquées plus bas. 2. QUI OFFRE CETTE GARANTIE (GARANT) : Maxus, 100 Production Drive, Harrison, Ohio, 45030 Téléphone : (800) 543-6400 – www.maxustools.com 3. QUI REÇOIT CETTE GARANTIE (ACHETEUR) : L’acheteur original (sauf en cas de revente) du produit Maxus. 4.
PAGE 10
Èclaboussure - blocage de particules Le trou du connecteur de boyau est couvert 10 Vider le réservoir du compresseur et installer le séparateur d’eau, voir la case « humidité dans l’air comprimé » Le pistolet ne s’arrête pas gâchette grippée Joints toriques endommagés dans la soupape d’air Retirer et remplacer les joints toriques Èclaboussure - faible vide 1. Jet et/ou buse usé(e) 1. Remplacer le jet et/ou la buse 2. Accumulation d’abrasif autour du jet/buse 2. Retirer la buse et le jet et nettoyer.