Operating Instructions and Installation Instructions

Visit: www.maxview.co.uk - Search ‘Target’ for potential software updates
Page 5
Connections and features:
Control Box:
1. Fuse
2. Power Switch
3. Power LED

1 2
3
4
6
5

7 8 9 10 12
11
Product contents:
> Antenna Unit / Control Box
> 65/85cm Antenna (separate carton)
> Accessory Pack
> LNB Park Plate x 1
> Control Box bracket x 2
> No.10 Screws x 6
> No.6 Screws x 4
> Cable Clips x 6
> M6 Button Head Screw x 4
> M6 Locking Nut x 4
> 6mm Plastic Washer x 4
> Cable Entry Plate x1
Required tools and equipment (not supplied):
> 32mm hole saw
> 2.5mm twist drill
> Power Drill
> No.2 Phillips screwdriver
> Weather Resistant Elastic Adhesive* and Applicator gun
> Surface Cleaner
> 10mm spanner
> Hexagonal socket key 4mm
> Deburrer/Round File/Emery paper
> Conduit (recommend method for securing cables)
> Automotive 2.5mm² cable
> Electrical connector block
> Flylead (for connection to satellite receiver)
*Maxview recommends the following adhesives:
> Sikaflex®-512 Caravan
> Geocel® Geobond HM
> Sikaflex®-252
Refence page 13 for
interface information
4. Sync Button
5. Status LNB
6. USB update port
7. Receiver
8. LNB in
9. Antenna Connectors
10. Not required
11. Installation Button
12. Power Input