Product Manual

12V DC CONNECTION

The generator is fitted with a socket outlet specifically for connection to a

lead acid battery for charging. The output voltage is 12V with maximum

output current of 8.3A. The generator will charge lead acid batteries of

various sizes from small to large.

DO NOT attempt to charge Nicad, Nickel metal hybrid, or lithium type

batteries. ONLY use the provided charger cable. Read the following section

for details.

CHARGING A BATTERY

 Start the engine first and allow to reach idle status before

connecting the generator to the battery. Battery charging is

performed using the 12V DC outlet only.

 Be sure the throttle switch is turned OFF while charging the

batteries.

 Be sure to connect the red battery charger lead to the positive (+)

battery terminal and connect the black lead to the negative (-)

battery terminal. DO NOT reverse these positions.

 Connect the battery charger leads to the battery

terminals securely so that they do not disconnect due to engine

vibration or other disturbances.

Change the battery by following the instructions in the owner’s

manual for the battery

The DC circuit breaker will turn OFF automatically if the current

exceeds rate output.