Product Manual

 The spark plug gap should be measured with a
wire
 Thickness gauge and, if necessary, adjusted to
specification.
 Install spark plug, spark plug cap, cover and
screws.
ENGINE OIL REPLACEMENT
Initial replacement of the engine oil is after one month
or 20 hours of operation.
Place the generator on a level surface and
warm up the engine for several minutes.
Then stop the engine and turn the fuel
petcock knob to OFF and the fuel tank cap
air vent knob to OFF.
Remove the screws (1) and then remove
the cover (2).
Remove the oil filler cap.
Place an oil pan under the engine.
Tilt the generator to drain the oil completely.
Return the generator to a level surface.
NOTE: DO NOT tilt the generator
when adding engine oil. This could
result in overfilling and damage to the
engine.
42