Product Manual

 Insert the foam element into the air filter case.

Be sure the foam Element Sealing surface

matches the air filter so that there is no air leak.

NOTE: Never operate the engine without foam element.

 Install air filter case cover, cover and

screws.

MUFFLER SCREEN AND SPARK ARRESTOR MAINTENANCE

Should be performed every 6 months or 100 hours. The air filter may need to

be cleaned more frequently when using in unusually wet or dusty areas.

 Remove the screws (1) and then remove the cover (2).

 Loosen the bolt (1) and then remove the muffler cap (2), the muffler

screen (3) and spark arrester (4).

 Remove the carbon deposits on the muffler

screen and spark arrester using a wire brush.

Use wire brush lightly to avoid damaging the

muffler screen or spark arrestor.

 Check the muffler screen and spark arrester,

replace them if damaged.

 Install the spark arrester.

 Install the muffler cap.

 Install the cover and tighten the screws.