Product Manual

Poisonous fumes from its exhaust. Always make sure there is adequate ventilation

when operating this equipment.

EXPLOSIVE HAZARD: Fuel and its vapours are extremely flammable and explosive.

Fire or explosion from these vapours can cause severe burns or even death.

ROTATING PARTS: Starter and other rotating parts on this tool can entangle

Loose clothing, long hair and accessories resulting in moderate to severe injury.

HOT SURFACES: Engine muffler and other engine parts can become very hot.

Coming in contact with hot engine components can cause serious burns. Hot exhaust

Gases from the engine can cause clothing to ignite if in contact for any length of time.

KICKBACK: Starter cord can kickback (recoil) very rapidly. Kickback will recoil the starter

cord quicker than you can let go. This action can result in broken bones, bruises, sprains

and/or fractures.

UNIT IS HEAVY: Take care when lifting or moving the unit.

INJECTION HAZARD: Pressure washers can product fluid streams severe enough

to penetrate animal and human flesh.

SLIPPING AND FALLING: Pressure washers produce puddles of slippery liquid

That can result in falls. Kickback from spray wand can result in falls when using

Unstable platforms.

IMPORTANT INFORMATION ABOUT THIS MANUAL:

Improper maintenance and operation are responsible for the majority of accidents involving gas

pressure washers. The largest portion of these could be prevented by recognising the basic safety rules

and precautions. Most accidents can be avoided if the operator recognises a potentially hazardous

situation before it happens and by observing appropriate safety rules and procedures as outlined in this

manual.

Basic safety precautions are outline in the SAFETY portion of this manual and throughout the text in this

manual where a potential hazard might occur.

Hazards that MUST be avoided to prevent serious injury follow headers marked DANGER or WARNING.

These same precautions are placed as labels on the tool itself. NEVER use this pressure washer for

applications that are NOT specified in this manual.