User's Manual

RF-GPS3009 PS3 Wireless Steering Wheel
1 、 The source buttons which can be programmed: X, ○ ,□ ,△ ,
L1,L2,R1,R2
2、Buttons with program function: foot pedals, left & right wings, L3&R3,
and gear stick
3、Setup of PROGRAM:
A. Press and hold “SELECT+START” for 3 seconds, the LED is on;
B. Now press the button with program function, then the LED flashes;
C. Press the source button, the LED turns off. Now the Program setup is
finished
4、Cancellation of PROGRAM
(1) To cancel single programmed function
A. Press and hold “SELECT+START” for 3 seconds, the LED is on
B. Press the button with program function, the LED flashes
C. Press the button again, then the LED turns off to indicate the single
program setup has been deleted.
(2) To cancel all programmed function
A. Press and hold “SELECT+START”, the LED is on;
B. Press and hold START button till the LED turns off. All programmed
buttons are cleaned up and get back to default status.
 Relocate foot pedals to RY axis
(1) To set up the function
1. Press the SELECT+START buttons for 3 seconds, the LED light is on
2. Press the left on the D-pad, the LED light will turn off and the Relocation setup
will come into effect.
(2) To clean up the function
1. Press the SELECT+ STRAT buttons for 3 seconds, the LED light is on
2. Double press the foot pedal which has been set as RY axis, the LED light will turn
off and the setting has been cleaned up.