SERVICE, INSTALLATION AND INSTRUCTION MANUAL For AUTHORIZED PARTS or TECHNICAL SERVICE, please contact: 1-877-368-2797 or Service@MaxxHelp.com 3355 Enterprise Avenue, Suite 160, Fort Lauderdale, FL 33331 USA Phone: (954) 202-7419 • Website: MaxximumFoodService.com MXSH3.4S MXSH5.2S MXSH7.
Table of Contents SERIAL NUMBER INFORMATION ..........................................................................................................................................3 APPLIANCE SAFETY ..............................................................................................................................................................4 IMPORTANT SAFEGUARDS ..................................................................................................................................
VISIT OUR WEBSITE for the MOST UP-TO-DATE VERSION of this MANUAL. http://www.maxximumfoodservice.com/ Fill out and return the enclosed warranty postcard or visit our website/warranty registration. Keep the dated proof of purchase invoice which establishes the appliance's warranty period.
APPLIANCE SAFETY Your safety and the safety of others are very important. Always read and obey all safety messages in this manual. This is the Safety Alert Symbol. This symbol alerts you to potential hazards that can kill or injure you and others. All safety messages will follow the Safety Alert Symbol and either the words ”DANGER”, “WARNING” or “CAUTION”. DANGER WARNING DANGER means that failure to heed this safety statement may result in Death or Severe Personnel Injury.
SAVE THESE INSTRUCTIONS IMPORTANT SAFEGUARDS Before the appliance is used, it must be properly positioned and installed as described in this manual, so read the manual carefully. We strongly recommend that you have a professional install your new machine. The warranty may be affected or voided by an incorrect installation.
IMPORTANT SAFEGUARDS (cont.) l Remove the packing materials and clean the appliance before using. l Do not use this apparatus for other than its intended purpose. Electrical Connection • Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded.
DIMENSIONS TECHNICAL INFORMATION Model MXSH3.4S MXSH5.2S MXSH7.0S 22.8 x 22 x 33.625 30.4 x 22 x 33.625 37.8 x 22 x 33.625 mm: Overall Dimension W*D*H 579 x 559 x 854 772 x 559 x 854 960 x 559 x 854 Nominal Capacity 3.4 Cu Ft / 96 L 5.2 Cu Ft / 147 L 7.0 Cu Ft / 198 L Appliance Weight 67 lbs / 30 kg 78 lbs / 35 kg 88 lbs / 40 kg Hinged Lids 1 1 1 Storage Basket 1 1 1 115V/60Hz/1Ph 115V/60Hz/1Ph 115V/60Hz/1Ph 0.36 (60) 0.5 (90) 0.
RECEIVING AND INSPECTING THE EQUIPMENT Even though most equipment is shipped crated, care should be taken during unloading so the equipment is not damaged while being moved into the building. 1. Visually inspect the exterior of the package and skid or container. Any damage should be noted and formally reported to the delivering carrier as soon as possible within 10 days. 2. If damaged, open and inspect the contents with the carrier. 3.
COMPONENT INFORMATION (cont.) MXSH3.4S MXSH5.2S HANDLE WITH LOCK COMPRESSOR ON LIGHT COMPRESSOR ON LIGHT THERMOSTAT CONTROL (TEMPERATURE) POWER LIGHT POWER LIGHT THERMOSTAT CONTROL (TEMPERATURE) CASTERS CASTERS MXSH7.0S HANDLE WITH LOCK COMPRESSOR ON LIGHT POWER LIGHT THERMOSTAT CONTROL (TEMPERATURE) CASTERS APPLIANCE INSTALLATION WARNING Excessive Weight Hazard Use two or more persons to move and install appliance. Failure to do so may result in back or other injury.
APPLIANCE INSTALLATION (cont.) • Avoid locating the unit in damp, very humid or moist areas. • Before connecting the unit to the power source, let it stand upright for approximately 4 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation. • Clean the interior surface with lukewarm water or mild detergent aqueous solution using a soft cloth that won’t scratch the surface of this appliance.
APPLIANCE INSTALLATION (cont.) Leveling Ensure the floor where the unit is to be located is level, or shim the unit to level. Stabilizing All models are supplied with casters for your convenience. It is very important, however, that the cabinet be installed in a stable condition with the front wheels locked while in use. Should it become necessary to lay the unit on its side or back for any reason, allow at least 24 hours before start-up to allow compressor oil to flow back into place.
OPERATION (cont.) Defrosting Your Freezer: • • • • A proper defrost operation may require 3 to 6 hours. When? For the most efficient operation and minimum energy consumption, defrost the freezer when the frost on the freezer walls is excessive or becomes ¼ inch thick as that ice or frost build up will negatively impact your appliance’s performance. Choose a time when the stock of frozen food is low or empty the unit if there is another convenient refrigerated storage space for these perishable food items.
OPERATION (cont.) • • • If the loading amount is too large, the quality of freezing is reduced which affects the quality of frozen foods. Do not attempt if there is ¼” of ice or frost build up on the compartment walls until after the appliance has been thoroughly defrosted and returned to its proper holding temperature. Do not load food product within 4 inches of the cover. • Do not load more than 25-percent of the unit's storage capacity with non-frozen product.
TROUBLESHOOTING GUIDE BEFORE CALLING FOR SERVICE If the unit appears to be malfunctioning, read through the OPERATION section of this manual first. If the problem persists, see Troubleshooting below. The problem may be something very simple that can be solved without a service call. TROUBLESHOOTING Fault Possible Cause Action Power cord unplugged. Plug freezer into a grounded 3 prong outlet. Freezer temperature control is set to "OFF". Turn the temperature control to a setting between 1 and 7.
Fault Possible Cause Action Food temperature is too cold. Temperature control is set too cold. Freezer needs cleaning. Freezer has an odor. Turn control to a warmer setting and allow several hours for freezer temperature to stabilize. Clean the freezer. See “Cleaning Your Freezer”. Food is improperly wrapped or sealed and is giving off odor. Wrap and seal food tightly before storing in freezer.
WIRING DIAGRAMS MODEL：ALL MODELS THERMOSTAT G MOTOR PROTECTOR COMPRESSOR ON LIGHT PLUG PTC STARTER L POWER LIGHT E N CAPACITOR G G COMPRESSOR PARTS MXSH3.4S 1 MXSH5.2S 2 MXSH7.
