SERVICE, INSTALLATION, AND INSTRUCTION MANUAL V1_051517 For AUTHORIZED PARTS or TECHNICAL SERVICE, please contact: 1-877-368-2797 or Service@MaxxHelp.com FOR SOME MODELS the POWER SUPPLY CORD is NOT INCLUDED. MUST HAVE A 3-PRONG GROUNDING PLUG. 3355 Enterprise Avenue, Suite 160, Fort Lauderdale, FL 33331 USA Phone: (954) 202-7419 • Website: MaxximumFoodService.
Contents ICE MAKER SAFETY 3 IMPORTANT SAFEGUARDS 4-5 MAJOR FEATURES 5 TECHNICAL INFORMATION 6 INTRODUCTION 6 COMPONENT INFORMATION 6 ICE MAKER INSTALLATION Unpacking 7 Remove Packaging Material 7 Location Requirements 8-9 Typical Installation of Ice Storage Bin 9 Electrical Requirements 9 Connecting the power supply line 10 Water Supply 10 Installation Types 11 OPERATION Final Checklist before Operation 11 Control Panel Operation 11-12 How the Machine Makes Ice 13 Normal So
ICE MAKER SAFETY Always read and obey all safety messages. This is the Safety Alert Symbol This symbol alerts you to potential hazards that can injure or kill you and others All safety messages will follow the Safety Alert Symbol and either the words “DANGER”, “WARNING” OR “CAUTION” DANGER DANGER means that failure to heed this safety statement may result in death or severe personal injury.
IMPORTANT SAFEGUARDS Before the ice maker is used, it must be properly positioned and installed as described in this manual, so read the manual carefully We strongly recommend that you have a professional install your new machine The warranty may be affected or voided by an incorrect installation.
• DO NOT use solvent-based cleaning agents or abrasives on the interior These cleaners may transmit taste to the ice cubes, or damage or discolor the interior • The ice machine cleaner contains acids DO NOT use or mix with any other solvent-based cleaner products Use rubber gloves to protect hands Carefully read the material safety instructions on the container of the ice machine cleaner • Do not use this apparatus for other than its intended purpose Electrical Connection Do not, under any circumstances, cu
Introduction This user’s manual is intended for installing, using and servicing your Maxx Ice Machine. It is recommended that this manual be kept in an accessible place.
Ice Maker Installation POWER SUPPLY CORD - NOT INCLUDED. MUST HAVE A 3-PRONG GROUNDING PLUG. UNPACKING WARNING Excessive Weight Hazard Use two or more persons to move and install ice maker. Failure to do so may result in back or other injury. This unit is an ice maker only. It requires a separate ice storage bin. REMOVE PACKAGING MATERIALS IMPORTANT: Do not remove any permanent instruction labels or the data label on your ice maker.
INSTALLATION CLEARANCE TOP VIEW of ICE MACHINE REAR VIEW of ICE MACHINE Page | 8
REAR VIEW if ATTACHING to an ICE BIN The (2) security latch holes are used when securing to an ice bin. TO INSTALL ICE MACHINE to a ICE STORAGE BIN Two connecting brackets are attached to the upper rear edge of the ice storage bin. Turn the brackets up (180°) and use two screws to connect the main machine and ice storage bin. The feet of most bins can be rotated to adjust the height if necessary Follow instructions accompanying the bin you purchase.
RECOMMENDED GROUNDING METHOD POWER SUPPLY CORD - NOT INCLUDED. MUST HAVE A 3-PRONG GROUNDING PLUG. For your personal safety, this appliance must be grounded. To minimize possible shock hazard, the cord must be plugged into a mating 3-pronged and grounding-type wall receptacle, grounded in accordance with the National Electrical Code and local codes and ordinances.
INSTALLATION TYPES This ice maker has only been designed for mobile (free-standing) installation Mobile installation: An enclosed installation will allow you to install the ice cube machine under a counter or in a kitchen cabinet provided the required clearance space around the ice maker is respected..
OPERATION OF THE CONTROL PANEL: 1. When the unit is plugged in and turn on the power switch. Only “OFF” displays on the LCD screen. 2. Press the ON/OFF button, the LCD screen lights. If normal, only the words of “Water Fill” and “3 Min To End” displays on the LCD screen. The ice maker will start to make ice automatically when the words of “3 Min To End” changes to “0 Min To End". Note: Only when the double ice machine heads stacked, the words of “Stacking” may be displayed on the LCD screen.
Additional Functions: 1. Draining Function: press the “Clean” button and hold for 6 seconds, the machine will go into the draining water mode automatically. The words of “Purging Water” appear on the LCD screen. The words disappear after 3 minutes and the draining process stops. NOTE: Draining function only effect in “Water Fill” process and “Cleaning” process. 2.
HOW THE ICE MACHINES MAKES ICE Turn the power switch to the ON position. Then press ON/OFF button in front panel. The LCD screen lights. After about 3 minutes the machine will automatically go into the ice-making stage. There are two distinct cycles: freeze and harvest. In the freeze cycle, water flows to the evaporator surface. In the harvest cycle, the ice is released and water enters the machine.
Cleaning and Maintenance CAUTION If the ice maker is left unused for a long time, before the next use it must be thoroughly cleaned Follow carefully any instructions provided for cleaning or use of sanitizing solution Do not leave any solution inside the ice maker after cleaning. Periodic cleaning and proper maintenance will ensure efficiency, top performance, and long life.
Cleaning and Maintenance WARNING DO NOT use solvent-based cleaning agents or abrasives on the interior These cleaners may transmit taste to the ice cubes, or damage or discolor the interior WATER DISTRIBUTION TUBE CLEANING When you find that the ice cubes are incompletely formed or the output of ice cubes is low, the water distribution tube may be blocked Set the power switch to OFF Unscrew the six screws holding the top panel and remove the panel You will see the water distribution tube Rotate the water
WARNING The ice machine cleaner contains acids. DO NOT use or mix with any other solvent-based cleaner products. Use rubber gloves to protect hands. Carefully read the material safety instructions on the container of the ice machine cleaner. DISCARD the first batch of ice produced after cleaning.
Troubleshooting Guide PROBLEM The machine doesn't operate The water doesn't feed in after the ice maker starts Machine makes ice, but bin does not fill up with ice Water is leaking from the unit Cubes are partially formed or white at the bottom POSSIBLE CAUSE The ice maker is unplugged Plug the ice maker in The fuse is blown Replace fuse If it happens again, call for service to check for a short circuit in the ice maker The ice maker power switch is OFF Turn the ice maker power switch ON The ice
